Catalogs >
HAMAMATSU >
OPTICAL BLOCKS Optical Components for Optical Measurement

OPTICAL BLOCKS Optical Components for Optical Measurement
24Pages

Catalog excerpts

OPTICAL BLOCKS Optical Components for Optical Measurement - 1

OPTO OPTICAL BLOCKS MECHANICS Optical Components for Optical Measurement OVERVIEW Optical blocks are freely combinable modular units designed to facilitate optical connections that are usually difficult for low-light-level measurements. Hamamatsu provides various types of optical blocks that allow installation of optical components such as filters, mirrors, and lenses. Each optical block can be placed precisely and is easy to attach/detach yet excellent in light shielding. When used in combination with a Hamamatsu photomultiplier tube module, optical blocks allow low-light-level measurements even in an ordinary room environment. FEATURES GEasy to attach / detach GNo alignment required GExcellent light-shielding effect GMakes low-light-level measurement easy GEasy connection to microscopes USING EXAMPLE GConnecting to a microscope PMT module Adapter block A10030-xx Light shield Holder Stage Darkroom environment Filter block A10033-90 Shutter block A10036 Pinhole block A11027 Filter Mirror Lens

Open the catalog to page 1

OPTICAL BLOCKS Optical Components for Optical Measurement - 2

Over view Adapter block A10030 series The A10030 series is an adapter block for connecting a PMT module to a V-groove type optical block. C-mount adapter block A10039 This block connects a device having C-mount to V-groove type optical blocks. The connection angle for the device and block is adjustable. Fiber adapter block A10037 series Optical fiber cables with FC or SMA connectors can be connected to the blocks in the A10037 series. The lens assembled in the block collimates the light spread from the optical fiber. Beam expander block A10031 This optical block widens the diameter of a...

Open the catalog to page 2

OPTICAL BLOCKS Optical Components for Optical Measurement - 3

Product name / Type No. Over View C-mount interchangeable dichroic block A11214 The A11214 is a C-mount connection block for installing a dichroic mirror for use at a 45° angle of incidence. This is a holder block designed for a polarizer. Polarizing filters and waveplates are polarizing elements whose polarization characteristics change depending on direction and angle. CONNECTION EXAMPLES COMPATIBLE PMT MODULE Screw connection with PMT module Optical block with V-groove connector Optical block with C-mount Optical block with V-groove connector Optical block with V-groove connector Optical...

Open the catalog to page 3

OPTICAL BLOCKS Optical Components for Optical Measurement - 4

BLOCK CHARACTERISTICS GAdapter block A10030 series The A10030 series is an adapter block for connecting a PMT module to each block. The A10030 series adapter blocks have M4 and M3 screw holes for securing to an optical bench or optical stage. Weight Type No. Effective beam size 8 mm A10030-01 Approx. 18 g 12 mm* A10030-02 * When connected to other optical blocks, their effective optical path diameters take precedence. Dimensional outlines (Unit: mm) A10030-01 NOTE: Avoid frequently attaching and detaching from PMT module. 2 × M3 DEPTH 3 (MOUNTING THREADED HOLE) M4 DEPTH 5 0.5 (MOUNTING...

Open the catalog to page 4

OPTICAL BLOCKS Optical Components for Optical Measurement - 5

GFiber adapter block A10037 series Optical fiber cables with FC or SMA connectors can be connected to the blocks in the A10037 series. The lens assembled in the block collimates the light spread from the optical fiber. The A10037/A10037-01 is suitable for use in the visible region (400 nm to 700 nm) and the A10037-10/A10037-11 for use in the UV region (200 nm to 400 nm). Dimensional outlines (Unit: mm) Transmittance (Typical) Weight Recommended wavelength Connecter Focal length FC Visible SMA 10 mm Approx. 17 g FC UV SMA When fiber core diameter is 100 µm and NA is 0.2 Distance from Fiber...

Open the catalog to page 5

OPTICAL BLOCKS Optical Components for Optical Measurement - 6

BLOCK CHARACTERISTICS GJoint block A10038 series The A10038 series is a joint block for connecting one optical block to another. The joint is available in two types: MM (male-male) type and FF (female-female) type. Interposing the MM block (A10038-01) and/or FF block (A10038-02) between optical blocks allows various connections. Effective beam size 8 mm 8 mm Weight Approx. 10 g Approx. 25 g Dimensional outlines (Unit: mm) 9.0±0.1 The A11971 cuvette block is a small dark box specifically designed for cuvettes with an optical path length of 10 mm. It allows easy measurement of samples in...

Open the catalog to page 6

OPTICAL BLOCKS Optical Components for Optical Measurement - 7

The A10036 is a manual shutter block with a plate that is opened and closed by sliding it left and right. Light is sufficiently blocked so there will be no problem even at photon counting levels. Effective beam size NOTE: If you feel the shutter does not open and close smoothly, we recommend applying small amount of an optical grease to the plate. Dimensional outlines (Unit: mm) GND filter block A10032 series A neutral density (ND) filter is included in this optical block to attenuate light levels. Weight Built-in filter Transmittance Effective beam size 10 % 8 mm Approx. 25 g ND filter 1%...

Open the catalog to page 7

OPTICAL BLOCKS Optical Components for Optical Measurement - 8

BLOCK CHARACTERISTICS GInterchangeable filter block A10033-90 The A10033-90 is a holder block that allows you to insert an optical filter. The filter is held by the spacer ring and the retaining ring, and can be easily exchanged by using the accessory tool. The A11213 C-mount interchangeable filter block series (P.14) is also available. Filters with 25 mm diameters can be installed is these blocks. Effective beam size 8 mm Conpatible filter size Size: 12.7 mm (1/2 inch) to 15 mm (Max.)* Approx. (recommended: 15 mm) 24 g Thickness: 1.5 mm to 5 mm * Supplied: Screw ring tool, spacer ring,...

Open the catalog to page 8

OPTICAL BLOCKS Optical Components for Optical Measurement - 9

BLOCK CHARACTERISTICS GInterchangeable dichroic block A10034-90 The A10034-90 is a V-groove type holder block that allows installation of a dichroic mirror with a 45-degree incident angle, such as a commercially available sized dichroic mirror frequently used for microscopes. Hamamatsu also provides the A11214 C-mount interchangeable dichroic block. (p.15) SPECIFICATIONS Effective Type No. beam size A10034-90 Conpatible dichroic mirror W × H: 25 mm to 26 mm (W) × 35 mm to 38 mm (H) Approx. Thickness: 0.9 mm to 1.1 mm (recommended 1 mm) 139 g Dimensional outlines (Unit: mm) NOTE: • Dichroic...

Open the catalog to page 9

OPTICAL BLOCKS Optical Components for Optical Measurement - 10

BLOCK CHARACTERISTICS GBeam splitter block A10035 The A10035 uses a cubic type half-mirror. Incident light is split into reflected and transmitted beams at a ratio of 1 to 1. Effective beam size 8 mm * Designed for wavelength from 400 nm to 700 nm. NOTE: Light level is cut to approximately one third due to light absorption. Dimensional outlines (Unit: mm) Transmittance (Typical) GBeam splitter block A10035-90 The A10035-90 is a holder block designed to hold a 15 mm cubic type beam splitter. There are M3 screw holes in the bottom of the block for holding. Effective beam size Applicable beam...

Open the catalog to page 10