Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types
8Pages

{{requestButtons}}

Catalog excerpts

Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types - 1

Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types Easy-to-use detector modules with built-in preamps Infrared detector modules operate just by connecting to DC power supplies. Low noise thermoelectric cooled types using InGaAs, InAs, InSb or InAsSb elements are available. We welcome requests for custom devices that suit your application. Infrared detection Compact size Easy to use Operates just by connecting to DC power supply Circuit design optimized for detector characteristics 4-conductor cable for non-cooled type (for DC power supply): 2 m (with one side connector) A4372-02: G6121, C12494-011LH Built-in temperature control circuit (TE-cooled type) 6-conductor cable for TE-cooled type (for DC power supply): Detector element InGaAs (G8370-05) InGaAs (G12180-250A) InGaAs (G12182-210K) InGaAs (G12183-210K) InAs (P10090-21) InSb (P6606-310) InAsSb (P11120-201) InAsSb (P12691-201G) InAsSb (P13894-011NA) InAsSb (P13894-211MA) Window material Non-cooled AR coated (1.55 μm peak) borosilicate glass Two-stage TE-cooled Two-stage TE-cooled Borosilicate glass Two-stage TE-cooled Three-stage TE-cooled Sapphire glass Two-stage TE-cooled Non-cooled Two-stage TE-cooled Sapphire glass AR coated Ge None AR coated Ge *1: Vcc=power supply for circuit, Vp=power supply for cooling

Open the catalog to page 1
Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types - 2

Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types Incident light level Supply voltage Operating temperature*2 Storage temperature*2 Topr Tstg (°C) (°C) *2: o dew condensation N When there is a temperature difference between a product and the surrounding area in high humidity environments, dew condensation may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and reliability. Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the...

Open the catalog to page 2
Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types - 3

Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types Electrical characteristics (Typ. Ta=25 °C, unless otherwise noted) Output impedance Maximum output voltage RL=1 kΩ Vcc=±15 V, Vp=4.5 V (P4631-03), Vcc=±2.5 V (C12494-011LH) Recommended DC power supply (analog power supply): PW18-1.3ATS (TEXIO Technology), E3630A (Keysight Technologies) Current capacity: More than 1.5 times the maximum current consumption Ripple noise: 5 mVp-p or less (±15 V, +2.5 V, +4.5 V power supply)

Open the catalog to page 3
Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types - 4

Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types Dimensional outlines (unit: mm) Dimensional outline (unit: mm) 48 ± 1.5 (4 ×) M2.6 depth 5 (threaded hole) (4 ×) 2.8 depth 4 (through hole) + M2.6 depth 8 (for M2.6 flat head screw) 4-pin connector (voltage input) Photosensitive area BNC connector (signal output) Tolerance unless otherwise noted: ±1 KIRDA0008EG Dimensional outline (unit: mm) (4 ×) M3 depth 5 (threaded hole) Cooling fin (front side) BNC connector (signal output) 20 ± 0.3 Photosensitive area 6-pin connector (voltage input) Tolerance unless...

Open the catalog to page 4
Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types - 5

Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types Dimensional outline (unit: mm) Photosensitive area (4 ×) M3 depth 5 (threaded hole) Cooling fin (front side) BNC connector (signal output) 6-pin connector (voltage input) Tolerance unless otherwise noted: ±1 KIRDA0255EB Note: The cooling fin (front side) is removable

Open the catalog to page 5
Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types - 6

Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types Dimensional outline (unit: mm) Photosensitive surface Photosensitive area 6-pin connector (voltage input) (4 ×) M3 depth 5 (threaded hole) Cooling fin (front side) Dimensional outlines (unit: mm) BNC connector (signal output) Offset adjustment screw Tolerance unless otherwise noted: ±1 KIRDA0137EF Note: The cooling fin (front side) is removable. SMA connector (signal output) 4-pin connector (voltage input) Photosensitive area 17.5 Tolerance unless otherwise noted: ±0.2 KIRDA0269EC

Open the catalog to page 6
Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types - 7

Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types Dimensional outlines (unit: mm) 4-conductor cable (for DC power supply) A4372-02 2000 ± 100 70 ± 10 Solder processing Connector: HR10-7P-4P (made by Hirose Electric) Pin no. Lead color Connector end Dimensional outline (unit: mm) Black/white/blue stranded wire Blue Tolerance unless otherwise noted: ±1 KIRDA0196EF 6-conductor cable (for DC power supply) A4372-03 2000 ± 100 90 ± 10 1 Connector: HR10-7P-6P (made by Hirose Electric) Dimensional outline (A4372-07 unit: mm) Connector Pin connection Lead color...

Open the catalog to page 7
Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types - 8

Infrared detector modules with preamp Non-cooled and thermoelectrically cooled types Precautions · lways use a dual-polarity ±15 V or ±2.5 V power supply to operate this detector. Never use a single-polarity power supply. Using a A single-polarity power supply may cause the amplifier in the detector module to break down. · Regarding TE-cooled type, always supply +2.5 V or +4.5 V to cool the detector element. · e careful not to apply excessive force to the detector surface. Applying excessive force may damage the light input window. Do not B directly touch the light input window with bare...

Open the catalog to page 8

All HAMAMATSU catalogs and technical brochures

  1. SPAD MODULES

    5 Pages

  2. LIGHTNINGCURE

    29 Pages

  3. C13410-06A

    4 Pages

  4. PMA-12

    8 Pages

  5. L12542

    4 Pages

  6. FLAT EXCIMER

    16 Pages

  7. L15208-01

    3 Pages

  8. L15856-01

    3 Pages

  9. L14001-01

    2 Pages

  10. L14351-02

    4 Pages

  11. GC-113A

    2 Pages

  12. DIUTHAME

    12 Pages

  13. J12853

    2 Pages

  14. J12432-01

    2 Pages

  15. C15780-401

    4 Pages

  16. H15460-40

    4 Pages

  17. R14755U-100

    2 Pages

  18. LIGHT SOURCES

    23 Pages

  19. PHOTOTUBES

    8 Pages

  20. PSD

    8 Pages

  21. Photo IC

    8 Pages

  22. Image Sensors

    48 Pages

  23. Si Photodiodes

    48 Pages

  24. Si APD

    16 Pages

  25. FLOW CELLS

    4 Pages

  26. Si photodiodes

    41 Pages

Archived catalogs