Catalogs >
HAMAMATSU >
InAsSb photovoltaic detectors P13243 series

InAsSb photovoltaic detectors P13243 series
6Pages

Catalog excerpts

InAsSb photovoltaic detectors P13243 series - 1

InAsSb photovoltaic detectors With band-pass filter Infrared detectors with band-pass filter (3.3 µm, 3.9 µm, 4.26 µm, 4.45 µm) These are InAsSb photovoltaic detectors that use a band-pass filter for the window. Types using a band-pass filter with a center wavelength of 3.3 μm, 3.9 μm, or 4.26 μm are suitable for gas measurement, and a type using a band-pass filter of 4.45 μm is suitable for flame monitoring. These are environmentally friendly infrared detectors and do not use lead, mercury, or cadmium, which are substances restricted by the RoHS Directive. They are replacements for conventional products containing these substances. A two-element type that can detect two wavelength is also available. High sensitivity High-speed response Flame monitors (CO2 resonance radiation) High shunt resistance Compact, surface mount ceramic package Compatible with lead-free solder reflow Option (sold separately) Amplifier for infrared detector (ceramic package) Ceramic TO-46 Ceramic TO-46 Ceramic TO-46 Ceramic TO-46 Photosensitive area

Open the catalog to page 1

InAsSb photovoltaic detectors P13243 series - 2

InAsSb photovoltaic detectors [With band-pass filter] P13243 series Operating temperature Storage temperature Tstg*2 Topr*2 (℃) (℃) Incident light level (W/cm2) When there is a temperature difference between a product and the surrounding area in high humidity environments, dew condensation may occur on the product surface. Dew condensation may cause deterioration in characteristics and reliability. *3: Reflow soldering, JEDEC J-STD-020 MSL 2, see P.5 Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the 　 product within...

Open the catalog to page 2

InAsSb photovoltaic detectors P13243 series - 3

InAsSb photovoltaic detectors [With band-pass filter] P13243 series Shunt resistance Shunt resistance vs. chip temperature circuit example Measurement circuit example Chopper 1200 Hz Detector FFT analyzer or the like KIRDB0676EB Amplifier Black body 800 K

Open the catalog to page 3

InAsSb photovoltaic detectors P13243 series - 4

InAsSb photovoltaic detectors [With band-pass filter] P13243 series Dimensional outline (unit: mm) Dimensional outline (unit: mm) Dimensional outlines (unit: mm) P13243-033CF/-039CF/-043CF/-045CF 2.6 ± 0.2 Recommended land pattern. Values in parentheses indicate reference. Band-pass filter Photosensitive surface Index mark Cathode Case Anode Values in parentheses indicate reference. KIRDA0249EF

Open the catalog to page 4

InAsSb photovoltaic detectors P13243 series - 5

Dimensional outline (unit: mm) InAsSb photovoltaic detectors [With band-pass filter] P13243 series Photosensitive surface Band-pass filter Index mark Photosensitive area Recommended land pattern Type no. Recommended reflow soldering conditions Cathode (Ch1) Anode (Ch1) Anode (Ch2) Cathode (Ch2) Values in parentheses indicate reference values. KIRDA0267ED Recommended soldering conditions P13243-033CF/-039CF/-043CF/-045CF/-015CF/-016CF 300 °C 240 °C max. ∙ After unpacking, store the device in an environment at a temperature range of 5 to 30 °C and a humidity of 60% or less, and perform reflow...

Open the catalog to page 5

InAsSb photovoltaic detectors P13243 series - 6

InAsSb photovoltaic detectors [With band-pass filter] P13243 series P13243-033MF/-039MF/-043MF/-045MF ⸱ Solder temperature: 240 ℃ max. (10 s or less, once) Solder the leads at a point at least 1 mm away from the package body. Note: When you set soldering condition, check that problems do not occur in the product by testing out the condition in advance. Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions ∙ Disclaimer ∙ Metal, ceramic, plastic package products ∙ Compound opto-semiconductors (photosensors, light emitters) Technical information ⸱ Compound semiconductor...

Open the catalog to page 6