InAsSb photovoltaic detectors With band-pass filter P13243 series
6Pages

{{requestButtons}}

Catalog excerpts

InAsSb photovoltaic detectors  With band-pass filter P13243 series - 1

InAsSb photovoltaic detectors With band-pass filter Infrared detectors with band-pass filter (3.3 µm, 3.9 µm, 4.26 µm, 4.45 µm) These are InAsSb photovoltaic detectors that use a band-pass filter for the window. Types using a band-pass filter with a center wavelength of 3.3 μm, 3.9 μm, or 4.26 μm are suitable for gas measurement, and a type using a band-pass filter of 4.45 μm is suitable for flame monitoring. These are environmentally friendly infrared detectors and do not use lead, mercury, or cadmium, which are substances restricted by the RoHS Directive. They are replacements for conventional products containing these substances. A two-element type that can detect two wavelength is also available. High sensitivity High-speed response Flame monitors (CO2 resonance radiation) High shunt resistance Compact, surface mount ceramic package Compatible with lead-free solder reflow Option (sold separately) Amplifier for infrared detector Ceramic TO-46 Ceramic TO-46 Ceramic TO-46 Ceramic TO-46 Photosensitive area

Open the catalog to page 1
InAsSb photovoltaic detectors  With band-pass filter P13243 series - 2

InAsSb photovoltaic detectors [With band-pass filter] P13243 series Reverse voltage Operating temperature Storage temperature Incident light level Tstg*2 VR Topr*2 (℃) (W/cm2) (℃) (V) When there is a temperature difference between a product and the surrounding area in high humidity environments, dew condensation may occur on the product surface. Dew condensation may cause deterioration in characteristics and reliability. *3: Reflow soldering, JEDEC J-STD-020 MSL 2, see P.6 Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to...

Open the catalog to page 2
InAsSb photovoltaic detectors  With band-pass filter P13243 series - 3

InAsSb photovoltaic detectors [With band-pass filter] P13243 series Shunt resistance Shunt resistance vs. chip temperature circuit example Measurement circuit example Chopper 1200 Hz Detector FFT analyzer or the like KIRDB0676EB Amplifier Black body 800 K

Open the catalog to page 3
InAsSb photovoltaic detectors  With band-pass filter P13243 series - 4

InAsSb photovoltaic detectors [With band-pass filter] P13243 series Dimensional outline (unit: mm) Dimensional outline (unit: mm) Dimensional outlines (unit: mm) P13243-033CF/-039CF/-043CF/-045CF 2.6 ± 0.2 Recommended land pattern. Values in parentheses indicate reference. Band-pass filter Photosensitive surface Index mark Cathode Case Anode Values in parentheses indicate reference. KIRDA0249EF

Open the catalog to page 4
InAsSb photovoltaic detectors  With band-pass filter P13243 series - 5

Dimensional outline (unit: mm) InAsSb photovoltaic detectors [With band-pass filter] P13243 series Photosensitive surface Band-pass filter Index mark Photosensitive area Recommended land pattern Type no. P13243-016CF 4.26 µm 3.9 µm Cathode (Ch1) Anode (Ch1) Anode (Ch2) Cathode (Ch1) Values in parentheses indicate reference. KIRDA0267EC Recommended soldering conditions P13243-033MF/-039MF/-043MF/-045MF Type no. Note: When you set soldering conditions, check that problems do not occur in the product by testing out the conditions in a

Open the catalog to page 5
InAsSb photovoltaic detectors  With band-pass filter P13243 series - 6

Recommended reflow soldering conditions InAsSb photovoltaic detectors [With band-pass filter] P13243 series ∙ After unpacking, store the device in an environment at a temperature range of 5 to 30 °C and a humidity of 60% or less, and perform reflow soldering within 1 year. ∙ he effect that the product receives during reflow T soldering varies depending on the circuit board and reflow oven that are used. When you set reflow soldering conditions, check that problems do not occur in the product by testing out the conditions in advance. Related information www.hamamatsu.com/sp/ssd/doc_en.html...

Open the catalog to page 6

All HAMAMATSU catalogs and technical brochures

  1. SPAD MODULES

    5 Pages

  2. LIGHTNINGCURE

    29 Pages

  3. C13410-06A

    4 Pages

  4. PMA-12

    8 Pages

  5. L12542

    4 Pages

  6. FLAT EXCIMER

    16 Pages

  7. L15208-01

    3 Pages

  8. L15856-01

    3 Pages

  9. L14001-01

    2 Pages

  10. L14351-02

    4 Pages

  11. GC-113A

    2 Pages

  12. DIUTHAME

    12 Pages

  13. J12853

    2 Pages

  14. J12432-01

    2 Pages

  15. C15780-401

    4 Pages

  16. H15460-40

    4 Pages

  17. R14755U-100

    2 Pages

  18. LIGHT SOURCES

    23 Pages

  19. PHOTOTUBES

    8 Pages

  20. PSD

    8 Pages

  21. Photo IC

    8 Pages

  22. Image Sensors

    48 Pages

  23. Si Photodiodes

    48 Pages

  24. Si APD

    16 Pages

  25. FLOW CELLS

    4 Pages

  26. Si photodiodes

    41 Pages

Archived catalogs