Catalogs >
HAMAMATSU >
HIGH VOLTAGE POWER SUPPLY SOCKET ASSEMBLY C12597-01

HIGH VOLTAGE POWER SUPPLY SOCKET ASSEMBLY C12597-01
2Pages

Catalog excerpts

HIGH VOLTAGE POWER SUPPLY SOCKET ASSEMBLY C12597-01 - 1

HIGH VOLTAGE POWER SUPPLY SOCKET ASSEMBLY C12597-01 C12597-01 is a high voltage power supply socket assembly for 28 mm (1-1/8 inch) diameter side-on photomultiplier tubes (PMT), incorporating a regulated high voltage power supply and an active voltage divider. It enables simple yet stable PMT operations with extended DC output linearity by only supplying +15 V and connecting to a potentiometer or a 0 to +5 V for high voltage adjustments. FEATURES GSuperior DC Output Linearity GFast High Voltage Programming Response GLow Power Consumption GCompact GLow Ripple/Noise SPECIFICATIONS Parameter Applicable PMT Input Voltage Input Current at Maximum High Voltage Output Voltage Range at -1000 V Linear DC Output of PMT A at -500 V Line Regulation Against ±1 V Input Change Anode Ripple Noise (p-p) High Voltage Control High Voltage Programming Response C Temperature Coefficient of High Voltage Output Operating Temperature Storage Temperature NOTE: Awithin 2 % linearity BLoad resistance = 1 MΩ, load capacitance = 22 pF (measurement frequency 100 MHz max.) Cfor 0 % to 99 % high voltage change Figure 1: Linearity Characteristics 20 Figure 2: Practical PMT Output Limits 330 kΩ / STAGE RESISTIVE DIVIDER 330 kΩ / STAGE RESISTIVE DIVIDER Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2014 Hamamatsu Photonics K.K.

Open the catalog to page 1

HIGH VOLTAGE POWER SUPPLY SOCKET ASSEMBLY C12597-01 - 2

HIGH VOLTAGE POWER SUPPLY SOCKET ASSEMBLY C12597-01 Figure 3: High Voltage Controlling Characteristics TACCB0041EA Figure 4: Schematic Diagram Figure 5: Dimensional Outline (Unit: mm) ACTIVE VOLTAGE DIVIDER 38 HIGH VOLTAGE POWER SUPPLY Vref (+5 V) OUT (BLUE) HV CONTROL (WHITE) +15 V (Vcc) IN (RED) GND (BLACK) GND (BLACK) HOUSING (METAL) COAX. RG-174/U CABLE, AWG24, IRRAX BLACK RED BLACK WHITE BLUE BLACK SIGNAL OUTPUT +15 V (Vcc) INPUT GND HV CONTROL Vref (+5 V) OUTPUT GND HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan,...

Open the catalog to page 2