*mydirectindustry

GC-113A

Product catalog summary

Specifications Overview:
The LIGHTNINGCURE® LC-L5G is a linear irradiation type UV-LED unit with a light emission window size of 113 × 18 mm. It operates at wavelengths of 365 nm, 385 nm, and 395 nm, with UV irradiance levels of 7.5 W/cm² and 10 W/cm² respectively. The LED design life is approximately 20,000 hours at 25°C, with a power consumption of 268 W and input voltage of +48 V DC. Cooling is achieved through forced air cooling by a fan.

Operating Conditions:
The unit operates within a temperature range of +5°C to +40°C and can be stored between -10°C to +60°C, provided there is no freezing. The operating humidity range is 20% to 80% without condensation, and storage humidity should be below 80% without condensation.

Control and Connectivity:
External control is facilitated through a 15-pin D-sub connector, allowing for irradiation control, light intensity adjustment, and error signal outputs. The unit supports optically connected operation with up to three light sources using a single power supply.

Standards and Compliance:
The unit complies with EMC standards, specifically CISPR 11 Group 1 Class A for emission limits and IEC 61326-1 Table 2 for immunity requirements.

Dimensional and Connection Details:
The external control connector is a 15-pin D-sub female, and the unit includes air inlets and outlets that must not be obstructed. Recommended power supplies include COSEL Co., Ltd. PBA300F-48 and MEAN WELL Enterprises Co., Ltd. MSP-300-48.

Graphical Data:
Graphs illustrate irradiance distribution at various distances from the light emission window, highlighting the uniformity and intensity of UV light across different positions.

Catalog excerpts

Linear irradiation type UV-LED unit Specifications Parameter Light emission window size 365 Storage temperature range Operating humidity range Storage humidity range Irradiation control, light intensity adjustment, various error signals Power consumption Cooling method Operating temperature range External control Connectable operation *3 Applicable standard Emission limits: CISPR 11 Group 1 Class A IEC 61326-1 Immunity requirements: Table 2 *1: Maximum UV irradiance within the irradiation area. *2: Average time until the irradiance drops to 70 % of the initial level when operated at 25 °C. *3: Optically connected operation. The light source for cascade operation is designed to minimize degradation of light output at the connected portion when light source is aligned with no gap. *4: Evaluated with 3 light sources connected and light source connection ca

Open the catalog to page 1

Simulation of irradiance distribution ■ Wavelength: Distance from light emission window Distance from light emission window Distance from irradiated center (mm) Dimensional outlines Distance from irradiated center (mm) (Unit: mm) External control connector (15-pin D-sub male) External control connector (15-pin D-sub female) control connector (15-pin D-sub) connection Light intensity adjustment voltage Alarm signal Secure 100 mm or more of space from the air inlet or air outlet. Error signal Light emission window 113 × 18 *1: Do not cover the air inlet or air outlet. Irradiation control signal...

Open the catalog to page 2

All HAMAMATSU catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list