Catalogs >
HAMAMATSU >
C15780-401

C15780-401
4Pages

Catalog excerpts

Infrared detector modules with preamp Metal dewar type High sensitivity modules of easy-to-use These devices combine a dewar type detector with a compatible preampliﬁer, and easily operate to detect infrared radiation just by connecting to a DC power supply. InGaAs, InSb, and Type II superlattice detectors are provided as standard devices (liquid nitrogen cooling). Custom-designed devices with diﬀerent active areas, FOV or ampliﬁer gain, etc. are also available to meet your speciﬁc needs. Compact integral detector unit Infrared detection Optimum connections between the detector element and preampliﬁer allow ampliﬁed signals to be easily obtained. Required power supply speciﬁcations · · · · · G7754 series, P7751 series: ±15 V (±12.0 to ±17.5 V can also be used) Current capacity: 1.5 times or more of each module's maximum current consumption Ripple noise: 5 mVp-p or less Analog power supply only Recommended DC power supplies: PW18-3AD (TEXIO) E3630A (Keysight Technologies) Cable (for DC power supply): 2 m (connector installed at one end) BNC-BNC coaxial cable (for signal output): 2 m Instruction manual Speciﬁcations / Absolute maximum ratings Detector element Photosensitive area External power supply*1 Supply voltage (V) Absolute maximum ratings Operating Storage Supply External input temperature temperature capacitance voltage Topr Tstg (mA) (V) (°C) (°C) (mm) Min. Typ. Max. InGaAs G7754-01 ϕ1 (G12183-010 chip) ±23 InGaAs G7754-03 ϕ3 ±12.0 ±15.0 ±17.5 (G12183-030 chip) ±18 0 to +40 -20 to +50 P7751-01 InSb (P5968-060) ϕ0.6 ±30 P7751-02 InSb (P5968-200) ϕ2 Type II superlattice C15780-401 ϕ0.1 ±14.5 ±15.0 ±15.5 +45, -30 (P15409-901) *1: Use only an analog power supply. Note: Nitrogen hold time: 12 hours or more (at the time of shipment) Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute m

Open the catalog to page 1

Infrared detector modules with preamp Metal dewar type Electrical and optical characteristics (Typ. Ta=25 °C) Measurement Noise PhotoPeak condition Cutoﬀ Cutoﬀ sensitivity equivalent sensitivity Output power wavelength frequency S Element wavelength impedance Type No. NEP λc fc λ=λp temperature λp *2 λ=λp T (°C) (μm) (μm) (V/W) (W/Hz1/2) (Hz) (Ω) 9 G7754-01 2 × 10 3 × 10-14 2 to 500 2.0 2.4 G7754-03 5 × 108 1.5 × 10-13 2 to 500 -196 50 P7751-01*4 3 × 10-13 5 to 10000 3 × 108 5.3 5.5 P7751-02*4 1.5 × 108 1 × 10-12 5 to 12000 C15780-401*4 5.4 14.5 2 × 106 5.5 × 10-12 7 to 100000 *2: f=100 Hz...

Open the catalog to page 2

Infrared detector modules with preamp Metal dewar type Dimensional outline (unit: mm) 18 ± 1 DC input voltage ±15 V (4-pin connector) Foam polystyrene plug Pump-out pipe Cable (for DC power supply) A4372-02 2000 ± 100 70 ± 10 Window InSb, Type II ɸ12 ± 0.5 InGaAs ɸ14.3 ± 0.5 Photosensitive surface Shielded wire (4 conductors) Solder processing Connector: HR10-7P-4P (made by Hirose Electric) Lead color Black/white/blue strande

Open the catalog to page 3

Infrared detector modules with preamp Metal dewar type Precaution for use · The detector should not be placed horizontally during use. · Using these detectors in an environment subjected to vibration may cause microphonic noise. Take measures to prevent vibration as needed. Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions ∙ Disclaimer ∙ Compound opto-semiconductors (photosensors, light emitters) Technical information ∙ Compound semiconductor photosensors / Technical note Information described in this material is current as of December 2021. Product specifications are...

Open the catalog to page 4