*mydirectindustry

Catalogs
HAM-LET
THREE-PIECE BALL VALVES H-500 SERIES

THREE-PIECE BALL VALVES H-500 SERIES

Product catalog summary

Overview: The H-500 Series is a line of three-piece ball valves designed for moderate-pressure instrumentation applications. These valves are suitable for general service and instrumentation panels, offering high flow, tight shutoff, and low operating torque.

Materials of Construction: The valves are constructed using stainless steel (St.St. 304 and 316) for components like the handle, stem, and locking device. The body is made from ASTM A351 Gr. CF8M stainless steel, and the end caps from CF3M stainless steel. The seats and gaskets are primarily made from PTFE.

Features: The H-500 Series valves are certified for ISO 15848-1:2006(E) and feature a blow-out proof stem with a Belleville washer design for long-lasting stem sealing. They support manual operation with an integral locking device and have a flow coefficient (Cv) ranging from 1.2 to 24.0. The maximum allowable working pressure (MAWP) is 3000 psig (204 Bar), with a maximum allowable working temperature (MAWT) of 450°F (232°C).

Seat Materials: The document details various seat materials including Virgin PTFE, UHMWPE, Modified PTFE, St. St. Powder Filled PTFE, and PEEK, each with specific properties such as chemical resistance, temperature, and pressure ratings.

Pressure-Temperature Ratings: The document provides detailed pressure-temperature ratings for different seat materials, indicating their suitability for various applications.

Testing and Cleaning: Each valve undergoes burst and proof testing, including leakage tests with nitrogen at 80 & 1000 psig. Valves are cleaned according to standard procedures, with options for oxygen clean and lubricant-free packaging.

Actuation: The H-500 Series supports pneumatic actuation with 90° actuation for 2-way valves. Actuators comply with industry standards and are available in various sizes. Optional accessories include limit switches, proximity sensors, and solenoid valves.

Ordering Information: The document provides detailed ordering information for actuated valves, including actuator designators and mounting kit details.

Warnings: The document emphasizes the responsibility of the system designer and user to select suitable products for their applications, considering material compatibility and product ratings to avoid property damage or personal injury.

Ordering Information for Handle Kits and Seal Kits: This document provides detailed ordering information for the H-500 series handle and seal kits. It specifies the standard features and options available for customization.

Specifications:

All handles come with a locking device as standard.
Full bore is standard for sizes 1 1/4”, 1 1/2”, and 2” with threaded ends only.

Valve Series and Options:

Valve Series: H-5 - -00 S SS L 1/4
Handle Types: Lever Handle, Oval Handle, Grip Handle
End Connection Types: LET-LOK®, ONE-LOK®, NPT, ISO Tapered, Tube socket weld, Tube buttweld, Extended Tube buttweld, Pipe socket weld, Pipe buttweld sch 40
End Connection Sizes: Ranges from 1/4” (6 MM) to 2” (50 MM)
Valve Body Sizes: Standard or Small
Structure Material: Stainless Steel 316, ASTM A351 Gr. CF3M for End Cups, ASTM A351 Gr. CF8M for Body

Seat Material Options:

PTFE, Modified PTFE, St.St. Filled PTFE, PEEK, UHMWPE

Valve Type Options:

LET-LOK® ends, Female ends, Male ends, Male to Female ends, Female to LET-LOK® ends, Male to LET-LOK® ends

Actuator Type and Treatment:

Actuator Type: Select per Table A, Aluminum Actuator
Treatment Options: Standard Cleaning & Passivation, Oxygen Clean, Lubricant Free

Additional Notes:

Special cleaning options (LF / OC) are available and will be added to the end of the valve order.
For high-temperature actuators, refer to the HAM-LET Pneumatic Actuator Catalog.
For double mounting actuators and accessories like Limit Switch and Solenoid Valve, contact your local representative or refer to the catalog.
For Stainless Steel or Electric Actuators, contact your local representative.

Catalog excerpts

THREE-PIECE BALL VALVES VALVES & ACTUATORS

Open the catalog to page 1

3-piece heavy-duty ball valves with: The H-500 Series is a moderate-pressure instrumentation Ball Valve for general service and instrumentation panels. The valves offer large ports for high flow, tight shutoff, long-life service and low operating torque. The H-500 Series can be used for bi-directional flow, is rated to max. 3000 psig (204 Bar) and performs as on/off service. Certified for ISO 15848-1:2006(E) Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel Blow-out proof stem with Belleville washer design for long life stem sealing...

Open the catalog to page 2

PRESSURE TEMPERATURE RATING VIRGIN PTFE SEAT UHMWPE SEAT Inlet Pressure (Psig) Inlet Pressure (Psig) Temp (°F) UHMWPE Ultra-high-molecular-weight polyethylene PTFE is a good all around, general-purpose seat material. PTFE has outstanding resistance to chemical attacks by a broad range of organic chemicals, inorganic chemicals and solvents, and is generally considered chemically inert. PTFE is a self lubricating polymer with a very low coefficient of friction, which makes an excellent seat material UHMWPE is a very tough material, highly resistant to corrosive chemicals and suitable for low-radiation...

Open the catalog to page 3

PACKING ADJUSTMENT CLEANING & PACKAGING Due to the varied service applications of the valve, packing adjustment may occasionally be necessary. Packing is factory adjusted to 1000 psig service. Initial packing adjustment is recommended after installation and prior to start-up. Please find more information on H-500 under Installation Instructions. The H-500 design has been tested for Burst and Proof. Standard testing for each H-500 valve includes testing with nitrogen at 80 &1000 psig. Each valve is tested for leakage through the shell, packing and ball seats. The maximum allowable leakage across...

Open the catalog to page 4

H-500 LET-LOK® STANDARD CONFIGURATION DIMENSIONS SERIES End Connection VALVES & ACTUATORS H-510 FEMALE NPT / BSPT STANDARD CONFIGURATION DIMENSIONS SERIES HAM-LET ADVANCED CONTROL TECHNOLOGY

Open the catalog to page 5

H-510 TUBE SOCKET WELD STANDARD CONFIGURATION DIMENSIONS SERIES mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch VALVES & ACTUATORS H-510 PIPE SOCKET WELD STANDARD CONFIGURATION DIMENSIONS SERIES mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch THREE-PIECE BALL VALVES H-500 SERIES

Open the catalog to page 6

B A H-580 PIPE BUTTWELD STANDARD CONFIGURATION DIMENSIONS SERIES mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch H-580 EXTENDED AND SHORT TUBE BUTTWELD STANDARD CONFIGURATION DIMENSIONS SERIES mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch 1 HAM-LET ADVANCED CONTROL TECHNOLOGY VALVES & ACTUATORS

Open the catalog to page 7

H-500 OVAL HANDLE End Connection VALVES & ACTUATORS H-500 GRIP HANDLE (OVAL) End Connection THREE-PIECE BALL VALVES H-500 SERIES

Open the catalog to page 8

H-500 - PNEUMATIC ACTUATED VALVES FEATURES 90° Actuation for 2-way valves Actuators comply with industry standards for interface with ISO 5211, NAMUR and VDI/VDE 3845 Actuated valves are available factory assembled or seperately, actuator and mounting kits Limit switches, proximity sensors, position indicators, solenoid valves and other accessories are available upon request Standard Temperature range: -32°C to 90°C (-25.6°F to 194°F) Optional: High Temperature, Low Temperature Four standard actuator sizes are available upon request: Mini (designator “A1”), Small (designator “A2”), Medium (designator...

Open the catalog to page 9

The selection of Valve-Actuator assemblies provided herein is based on: Valve maximum allowable working pressure Ambient temperature (50 to 100°F / 10 to 37°C) Actuator fits to valve based on operating pressure of 6 bar, in accordance with table A. To order H-500 ball valve factory assembled with an actuator, the actuator designator shall be added to the valve part number/description per the below table. Example: H-500-SS-L-3/4-T with standard Double Acting Aluminum Actuator H-500-SS-L-3/4-T-A2 To order an actuator and mounting kit for field assembly: Double Acting Actuator ordering number: Z-A2...

Open the catalog to page 10

H-500 SERIES ORDERING INFORMATION Valve Series Valve Type Actuator Type BLANK Lever Handle LET-LOK® ends Female ends Male ends Male to Female ends Female to LET-LOK® ends Male to LET-LOK® ends Valve Body Size Seat Material Treatment BLANK - Standard Cleaning & Passivation BLANK PTFE TModified PTFE* ESt.St. Filled PTFE PKPEEK UUHMWPE *Standard for H-500S threaded ends only Structure Material - Oxygen Clean - Lubricant Free End Connection Type L HL N R TSW TBW XTBW PSW PBW Aluminum Actuator* * All handles are with locking device as standard * Full bore for 11/4”, 11/2”, 2” as standard with SS -...

Open the catalog to page 11