METERING VALVES H-1300 & MBV SERIES

Forged-body 316 St.St.or Brass Construction n Straight and Angle Patterns and Panel Mounting n MAWP 2000 psig - (138 bar) For HXF n MAWP 1000 psig - (69 bar) For H, HF n MAWT 400°F (204°C) n Flow coefficients (Cv) from 0.004 to 0.15 n Round & Slotted Handles with Screwdriver Slots n HAM-LET LET-LOK® Ends, Male & Female NPT, HTC® Face Seal Bead End Connections n 1°, 3° and 5° Stem Taper for required flow control n Stem with Stopper Shoulder for maximum life The H-1300 Series is a moderate-pressure instrumentation flow-regulating needle valve. It is generally used for instrumentation panels, sampling...

CLEANING & PACKAGING HAM-LET H-1300 Metering Valve is treated with HAM-LET Passivation Cleaning and Packaging (Procedure 8075). HAM-LET H-1300 Ball valves with face-seal end connections are treated with Oxygen Cleaning and Packaging (Procedure 8075). Valve Body Material 316 St.St. Handle Set Screw Flow Fixing Screw Safety Bonnet Sleeve Bonnet Stem O-ring Viton® (fluorocarbon) Guide Ring Body 18-8 Stainless Steel St.St. ASTM A-276 Glass-filled TFE St.St. ASTM A-182 HF SERIES ANGLE VALVE D Lock Set Screw helps determine required flow (slotted handles) Stem Upper Shoulder (for safe full opening)...

STANDARD CONFIGURATION DIMENSIONS Basic Ordering Number Stem Taper Angle Orifice mm/in 1/4'' LET-LOK® 6MM LET-LOK® 3.3mm 0.13 1/4'' LET-LOK® 0.13" Max 3/8'' LET-LOK® 6MM LET-LOK® 1/4'' Male NPT 1/8'' LET-LOK® 1/4'' LET-LOK® 3MM LET-LOK® 6MM LET-LOK® 1/8'' Male NPT 1/4'' Male NPT 1/8'' Male NPT 1/4'' Male NPT 1.4mm 0.03 1/8'' Female NPT 0.055" Max 1/8'' LET-LOK® 3MM LET-LOK® 6MM LET-LOK® 1/4" LET-LOK® 1/8'' Male NPT 1/4'' Male NPT 1/8'' Female NPT 1/4"' Male Face Seal 1/8'' LET-LOK® 1/4'' LET-LOK® 3MM LET-LOK® 1/8'' Male NPT 1/4'' Male NPT 1/8'' Male NPT 0.8 mm 0.004 1/4'' Male NPT 0.03'' Max...

FLOW SETTING H-1300 series metering valve is tested for bubble tight shutoff at 100 psig (6.8 bar) differential pressure. HF-1300 series metering valve handle dead stop is set at 4 to 10 std cm3/min with 5 psig (0.34 bar) inlet pressure. HXF-1300 series metering valve handle dead stop is set at 4 to 10 std cm3/min with 15 psig (1.0 bar) inlet pressure. The H, HF and HXF Series metering valve designs have been tested for Proof and Burst. Every H,HF & HXF-1300 metering valve is factory tested for proper assembly, using leak detection. FLOW DATA AT 70ºF (20ºC) H-1300 METERING VALVE 5° STEM HF-1300...

TECHNICAL DATA *O-ring Material Pressure - Temperature Ratings Temperature Rating °F (°C) Ethylene Propylene Viton® (Fluorocarbon) Perfluor Neoprene Shutoff Service Viton® (Fluorocarbon) is a standard O-ring for H,HF,HXF-1300 *Shutoff Service: In Stainless Steel constructions only. H-1300 Series valves are not recommended for shutoff in vacuum or gas service or for repetitive shutoff in liquid service. HANDLE OPTIONS Vernier Handle Round Aluminum Handle* E Metal Slotted Handle Metal Slotted Handle Standard for H * Black is Standard. Colored Handles are available upon request, see "Ordering Information"...

METERING BALL VALVE MBV SERIES FEATURES On/Off and Metering service PFA Encapsulated Ball Stem design Panel Mounting as standard MAWP 2000 psi (138 bar) for HXF MAWP 1000 psi (69 bar) for H, HF MAWT 300°F (150°C) End Connections: LET-LOK 1/16”, 1/8”, 1/4”, 3/8”; The Shut-off Metering Ball Valve Series provides the highest degree of precision metering for moderate pressure applications. This series features innovative and unique shut-off capability and allows full control of the process from complete shut-off to extra fine regulation. A choice of three precision stem tapers enables metering at...

METERING BALL VALVE DIMENSIONS F (Required panel hole) F (Required panel hole) F (Required panel hole) Basic Stem Ordering Taper Number Angle METERING VALVES H-1300 SERIES

O-ring Material - 5° stem taper H-13 HF-13 - 3° stem taper HXF-13 - 1° stem taper - Threaded NPT - Male Face Seal - ONE-LOK® - EPDM, - Neoprene - Perfluor - Buna-N Viton® O-rings are standard Handle Options - Vernier Handle - Red Aluminum Handle* - Yellow Aluminum Handle* - Green Aluminum Handle* - Blue Aluminum Handle* Body and Ends Material Pattern Valve Type BLANK - Standard Cleaning & Passivation - Oxygen Clean OC - Lubricant Free LF - Straight Port Valve - Angle Port Valve - MBV Configuration Seal Kit contains O-ring Handle Kit contains handle + set screw. Body Designator per end connection...

244 METERING VALVES H-1300 SERIES