HAM-LET HIGH PRESSURE UP TO 60,000 PSI

HAM-LET HIGH PRESSURE Ham-Let Group, a worldwide company, has produced high quality fittings, valves, and instrumentation solutions since its establishment in 1950. Our company standard of research and development, paired with our topnotch engineers has put us at the forefront of development. We have developed the Ham-let High Pressure line in order to fulfill the rapidly increasing demand for high pressure valves, fittings, tubes and accessories. The HHP products support the industry standard elevated pressures gas and liquid systems with working pressures up to 60,000 psi, in various industries...

HIGH PRESSURE UP TO 60,000 PSI SERVICE Fitting and tubing with cone-and-thread connection up to 60,000 PSI zz HHP high pressure line provide wide range of fittings including coupling, elbow, tee and cross with cone and thread connection to pressure rating up to 60,000 PSI and for 1/4’’, 3/8’’, 9/16’’ O.D sizes. zz All fittings body material is from high tensile 316 stainless steel. zz All fittings are supplied with glands and sleeves. High-pressure connections having an elastic metal-tometal sealing. A complete connection consists of four parts: a high-pressure tube, a collar, a gland and a female...

HIGH PRESSURE FITTINGS AND COMPONENTS Ordering Information inch Ordering Information inch HAM-LET HIGH PRESSURE

HIGH PRESSURE FITTINGS AND COMPONENTS W1 Ordering Information inch HAM-LET LEADING BY INNOVATION

HIGH PRESSURE FITTINGS AND COMPONENTS W1 STRAIGHT COUPLING Ordering Information ELBOW Ordering Information HAM-LET HIGH PRESSURE

HIGH PRESSURE FITTINGS AND COMPONENTS CROSS Ordering Information DOUBLE CROSS Ordering Information HAM-LET LEADING BY INNOVATION HIGH PRESSURE FITTINGS & VALVES

HIGH PRESSURE FITTINGS AND COMPONENTS Ordering Information UNION MALE Ordering Information inch HAM-LET HIGH PRESSURE

MEDIUM PRESSURE ADAPTORS MALE HP TO FEMALE NPT Ordering Information HIGH PRESSURE FITTINGS & VALVES HAM-LET LEADING BY INNOVATION

MEDIUM PRESSURE ADAPTORS Ordering Information FEMALE HP - FEMALE NPT Ordering Information HAM-LET HIGH PRESSURE

MEDIUM PRESSURE ADAPTORS FEMALE HP - MALE NPT Ordering Information BULKHEAD COUPLING HIGH PRESSURE ADAPTORS BULKHEAD COUPLING Ordering Information C Panel Hole Max. Panel Size Thickness HAM-LET LEADING BY INNOVATION HIGH PRESSURE FITTINGS & VALVES

MEDIUM AND HIGH PRESSURE ADAPTORS W1 MALE HP - FEMALE HP (REDUCER GLAND) A Ordering Information FEMALE HP - FEMALE HP (REDUCER BUSHING) Ordering Information HAM-LET HIGH PRESSURE

CONED AND THREADED NIPPLES Tube Diameter Ordering Information Tube Lenght * Raw tubes are available by request, please contact your sales representative for additional information HAM-LET LEADING BY INNOVATION

Medium and High pressure Fittings and Components HOW TO ORDER Fitting Type Connection Size Connection Style High Pressure High Pressure Bulk Head Connection Style High Pressure Fitting Component Type DX Double Cross NE Nipples HAM-LET HIGH PRESSURE Connection Type Connection Type Connection Size

HIGH PRESSURE NEEDLE VALVES UP TO 60,000 PSI SERVICE zz Connection type: cone and thread connection is available in 1/4’’, 3/8’’, 9/16’. sizes and for pressure rating of 60,000 Psi. zz Tip stem: all high pressure connection valves are with Non-rotating stem with Vee Tip as a default, non-rotating stem assure that there will not be any material reduction in the sealing area between the stem Tip and the body and to prevent galling. Large orifices at rated pressures Panel mounting standard Safety cover protects the operator against blowout of valve internals Internal stem-lifting stop prevents stem...

NV VALVES MATERIAL OF CONSTRUCTION 2 Material Pressure rating up to 60,000 psi (4,137 bar) Hand wheel Thin plate washer Chrome Steel Chrome Steel/Sheet steel Panel mounting nut plated Brass nickel Needle base Seal gland hand Seal thrust ring Back-up ring Thrust ring Valve body HAM-LET HIGH PRESSURE

MAWP+NEEDLE VALVE TECHNICAL DATE Size inch The Cv* values are only valid for fluid with a viscosity of 1.0 mPa*s (water) HAM-LET LEADING BY INNOVATION

NEEDLE VALVE_HAND OPERATED DIMENSIONS 2 WAY STRAIGHT HAM-LET DESCRIPTION (BODY THICKNESS) (BODY THICKNESS) (BODY THICKNESS) inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm mm HAM-LET HIGH PRESSURE

NEEDLE VALVE - AIR OPERATED NO (NORMALLY OPEN) DIMENSIONS (BODY THICKNESS) inch mm bar psi inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm mm HAM-LET LEADING BY INNOVATION HIGH PRESSURE FITTINGS & VALVES HAM-LET DESCRIPTION (BODY THICKNESS) (BODY THICKNESS)

NEEDLE VALVE - AIR OPERATED NC (NORMALLY CLOSE) DIMENSIONS (BODY THICKNESS) HAM-LET DESCRIPTION (BODY THICKNESS) (BODY THICKNESS) Operation Pressure inch mm inch mm bar psi inch mm inch mm inch mm inch mm inch mm inch mm inch mm mm HAM-LET HIGH PRESSURE

MEDIUM AND HIGH PRESSURE CONNECTION NEEDLE VALVE HOW TO ORDER OPTIONAL Valve Type High Pressure Valve Elbow / Angle Connection Size Series Needle HAM-LET LEADING BY INNOVATION Operaiting blank non actuated Air Actuator Normally Open Air Actuator Normally Close Connection Style Connection Type High Pressure

CONE AND THREAD TOOLING In addition to all the fittings and valves in the HHP line, tools that create a complete set of high pressure line assembly for Medium pressure, High pressure and Ultra-High pressure are available. There are 3 types of Cone and Thread tube available in the HHP line: zz Nipple in standard length zz Smooth tube that needs to be Coned and Threaded by the customer. HHP Cone and Thread tools are used for High pressure connections and are simple to handle. Cutting fluid is supplied with each order of coning tool in order to preform the cone properly Some parts are interchangeable...

CONING AND THREADING INSTRUCTIONS Coning Tubing Ends In order to get a proper sealing, you must use the HHP coning toll that provides approximately a 57°-59° cone in the end of the tube by completing the following steps: 1. Cut the tube with a Ham-Let Tube cutter and make sure to clean it properly with a Ham-Let Deburring tool. 2. Place the coning toll on a suitable vise and secure the body so you will have excess to the collet nut and knurled cap. 3. Rotate the knurled cap as far as possible to wards the coning tool body. 4. Take the knurled cap back away from the coning body by rotating counterclockwise...