H800 - Compact Ball Valves
8Pages

COMPACT ONE-PIECE BALL VALVES VALVES & ACTUATORS

Certified for ISO 15848-1:2006(E) Encapsulated Ball Stem design On/off-service, one-piece Ball Valve with 2-way pattern Diverter and on/off–service, one-piece Ball Valve with 3-way pattern Stainless Steel construction Allows bi-directional flow in 2-way straight pattern Has virtually no dead volume One-piece Ball Stem ensures alignment of stem and orifice MAWP 3000 psi (206 bar) ; MAWT 300ºF (149ºC) Panel mountable Vent options Variable end connection types and sizes from 1/16” to 1/2”, 3mm to 12mm peration with colored Nylon handles, metal handle and pneumatically actuated O The H-800,...

PACKING ADJUSTMENT The H-800 design has been tested for Burst and Proof. Standard testing for each H-800 valve includes testing with nitrogen at 80 &1000 psig. Each valve is tested for leakage through the shell, packing and ball seats. The maximum allowable leakage across the ball seats is 0.1 std cc/min. Due to the varied service applications of the valve, packing adjustment may occasionally be necessary. Packing adjustment for this valve can fix not only leakage through stem but also leakage through the seats. Packing is factory adjusted to 1000 psig service. Initial adjustment is...

STRAIGHT PORT VALVE & ANGLE PATTERN (Required panel hole) (Required panel hole) STANDARD CONFIGURATION DIMENSIONS Orifice Body Size Designator straight angle mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch 1/16 1/8 Let-Lok Imperial VALVES & ACTUATORS O-Ring 1/4 Face Seal Face Seal 1/4 Male Dimensions are for reference only, and are subject to change. M-NPT to 1/4 Let-Lok® Female ISO 7-1 tapered COMPACT ONE-PIECE BALL VALVES H-800 SERIES

(Required panel hole) STANDARD CONFIGURATION DIMENSIONS mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm 1/16 1/8 Let-Lok Imperial M-NPT to Let-Lok Female ISO 7-1 tapered Face Seal Male Dimensions are for reference only, and are subject to change. HAM-LET ADVANCED CONTROL TECHNOLOGY VALVES & ACTUATORS Orifice Body Size Designator

H-800 - PNEUMATIC ACTUATED VALVES FEATURES 90° Actuation for 2-way valves (Straight & Angle) 180° Actuation for T-type valves Actuators comply with industry standards for interface with ISO 5211, NAMUR and VDI/VDE 3845 Actuated valves are available factory assembled or separately, actuator and mounting kits Limit switches, proximity sensors, position indicators, solenoid valves, and other accessories are available upon request Standard Temperature range: -32°C to 90°C (-25.6°F to 194°F) Optional: High Temperature, Low Temperature Four standard actuator sizes are available upon request: Mini...

The selection of Valve-Actuator assemblies provided herein is based on: Valve maximum allowable working pressure Ambient temperature (50 to 100°F / 10 to 37°C) Actuator fits to valve based on operating pressure of 6 bar, as per table A. To order H-800 ball valve factory assembled with an actuator, the actuator designator shall be added to the valve part number / description per the below table. Example: H-800S-SS-L-1/4 with standard Spring Return Aluminum Actuator Normally Closed H-800S-SS-L-1/4-A1C VALVES & ACTUATORS To order an actuator and mounting bracket kit for field assembly: Spring...

H-800 SERIES ORDERING INFORMATION Valve Series VALVES & ACTUATORS LET-LOK® Ends Female Ends Male Ends Male to Female Ends - LET-LOK® - NPT - ISO parallel - ISO Tapered - Metal Face seal - One Lok Select Per Aluminum Table A Actuator* *See Notes below Actuator Type DV - Down Stream Vent* Body Designator Body and Ends Meterial BLANK - Straight A - Angle T - 3-Port Valve Pattern Type - Small - Medium - Large Vent Option BLANK - Standard Cleaning & Passivation Black Nylon Handle* Red Nylon Handle Blue Nylon Handle Yellow Nylon Handle Green Nylon Handle Metal (St.St.) Handle - Oxygen Clean -...