HIGH PERFORMANCE BALL VALVES VALVES & ACTUATORS

Certified for ISO 15848-1:2006(E) On/off-service ball valve with 2-way pattern Diverter-service ball valve with 3-way pattern Stainless Steel and Brass construction MAWP* 6000 psi (410 bar) MAWT* 500ºF (260ºC) Variable end connection types and sizes from 1/16” to 3/4” (3mm to 18mm) Operation with colored Nylon handles, metal handle, color anodized aluminum ISLT** (locking device) handles and pneumatically actuated The H-6800 Series is a high-performance instrumentation ball valve for general service and instrumentation panels. The valves offer a tight shutoff*, long-life service and a low operating...

PACKING ADJUSTMENT The H-6800 design has been tested for Burst and Proof. Standard testing for each H-6800 valve includes testing with nitrogen at 80 &1000 psig. Each valve is tested for leakage through the shell, packing and ball seats. The maximum allowable leakage across the ball seats is 0.1 std cc/min. Due to the varied service applications of the valve, packing adjustment may be occasionally necessary. Packing is factory adjusted to 1000 psig service. Initial adjustment is recommended after installation and prior to start-up. Please find more information in the installation instruction...

STRAIGHT PORT VALVE I C Panel Drill Hole STRAIGHT PORT, STANDARD CONFIGURATION DIMENSIONS Size VALVES & ACTUATORS Let-Lok® Metric Let-Lok® Inch Female BSPP Male BSPP Face Seal Male Face to face dimensions for LET-LOK® end connections (dimensions A and B) are finger tight. * Refers to standard nylon handle. ** Maximum panel thickness. Dimensions are for reference only, and are subject to change. HIGH PERFORMANCE BALL VALVES H-6800 SERIES

Panel Drill Hole Panel Drill Hole ANGLE & 3-PORT, STANDARD CONFIGURATION DIMENSIONS Size Female BSPP Male BSPP Face Seal Male DIMENSIONS FOR METAL HANDLE VALVE END CONNECTIONS Let-Lok® Metric Let-Lok® Inch Handle Designator HAM-LET ADVANCED CONTROL TECHNOLOGY VALVES & ACTUATORS

ECE R110, Class 0 approved for the CNG / NGV MAWP* 3770 psig (260 barg) Temperature range: -40°C (-40°F) to 120°C (248°F) Variable LET-LOK® end connection sizes: 1/4”, 3/8”, 6mm, 8mm,10mm Stainless Steel construction with spring loaded seats ECE Approved for 20,000 cycles The H-6800 CNG Series is a high-performance instrumentation manual ball valve for the CNG / NGV with ECE R110-type approval. The val ves offer a tight shutoff, long-life service and low operating torque. The H-6800 CNG Series ball valve is rated to max. 3770 psig and performs as a manual on/off service. * Maximum Allowed Working...

H-6800 - PNEUMATIC ACTUATED VALVES FEATURES 90° Actuation for 2-way valves (Straight & Angle) 180° Actuation for T-type valves Actuators comply with industry standards for interface with ISO 5211, NAMUR and VDI/VDE 3845 Actuated valves are available factory assembled or seperately, actuator and mounting kits Limit switches, proximity sensors, position indicators, Solenoid valves, and other accessories are available upon request Standard Temperature range: -32°C to 90°C (-25.6°F to 194°F) Optional: High Temperature, Low Temperature Four standard actuator sizes are available upon request: Mini...

The selection of Valve-Actuator assemblies provided herein is based on: Valve maximum allowable working pressure Ambient temperature (50 to 100°F /10 to 37°C) Actuator fits to valve based on operating pressure of 6 bar, as per table A. To order H-6800 ball valve factory assembled with an actuator, add the actuator designator to the valve part number / description per the below table. Example: H6800SSL1/4PSS with standard Double Acting Aluminum Actuator H6800SSL1/4PS-A1 To order an actuator and mounting kit for field assembly: Double acting Actuator ordering number: Z-A1 Corresponding mounting...

H-6800 SERIES ORDERING INFORMATION Valves Series Valve Type LET-LOK® End Connection Female End Connection Seat Material Male to Female End Connection Female to LET-LOK® End Connection Male to LET-LOK® End Connection Body and Ends Material* SS B *For other materials, please consult HAM-LET - LET-LOK® End - Threaded NPT - ISO parallel - ISO Tapered - Metal Gasket Face seal - One-Lok Tube Fittings - NPT to LET-LOK® - LET-LOK® to NPT Other end connections are available upon request. Actuator Type S Straight Port Valve A Angle Port Valve T 3-Port Valve Aluminum Actuator* *See Notes below Treatment...

ORDERING INFORMATION FOR SPARE KITS SEAL KIT Seal Kit includes seats, stem packings, body seals and lable. Body Designator per End Connection 1/4 Seat Material Valve Pattern For straight and angle Valves Modified PTFE PCTFE PEEK For Seal kits for “Old Design” valves, please contact a Ham-Let representative. VALVES & ACTUATORS HANDLE KIT Handle kit includes handle and set screw. To order a spare-parts kit, use the following format: Body Designator per End Connection 1/4 S Handle Type S R B Y G M M7 ISLTS ISLTB ISLTR ISLTY ISLTG Black Nylon Handle Red Nylon Handle Blue Nylon Handle Yellow Nylon...