H1200 Toggle Valves

1 / 4 PagesView full catalog

H1200 Toggle Valves

Product catalog summary

Features:

Compact and rugged design with stainless steel and brass construction.
Panel mountable with quick on/off service.
Available in straight and angle patterns, sizes 1/8" & 1/4".
LET-LOK®, male and female NPT ends.
Maximum allowable working pressure (MAWP) of 300 psig at 20°C (70°F).
Temperature rating from -20°F to 200°F (-28°C to 93°C).
Flow coefficient (Cv) ranges from 0.11 to 0.2.
Colored nylon handles for easy identification.

General Description:

The H-1200 Series toggle valve is designed for normally closed and quick on/off service. The valve opens fully when the handle is moved 90 degrees upwards and closes with a spring return when moved downwards. It features a PTFE soft seat for a positive seal.

Materials of Construction:

Valve body: 316 Stainless Steel or Brass.
Handle: Nylon.
Other components include stainless steel, nylon, and fluorocarbon materials.

Testing:

All designs are tested for burst and proof, with factory testing using nitrogen pressure at 300 psig for leak detection.

Cleaning & Packaging:

Standard cleaning and packaging procedures are followed, with optional oxygen clean and lubricant-free packaging available.

Standard Configuration Dimensions:

Dimensions vary based on end connection type and size, with detailed measurements provided for each configuration.

Ordering Information:

Seal and handle kits available with various O-ring materials and handle colors.
Options for valve type, body material, and treatment.

Warning:

The responsibility for selecting suitable products lies with the system designer and user, considering application details, material compatibility, and product ratings to prevent property damage or personal injury.

Catalog excerpts

TOGGLE VALVES VALVES & ACTUATORS

Open the catalog to page 1

GENERAL The H-1200 Series standard toggle valve is a compact design for normally closed and quick on/off service. Moving the handle 90 degrees upwards opens the valve to full flow and stops it firmly in the open position. Shifting the handle position downwards shuts off the valve by spring return. The PTFE soft seat at the tip of the stem provides a positive repetitive seal. FEATURES ■ Compact rugged design ■ Stainless Steel and Brass Construction ■ Panel mountable ■ Quick On/Off service ■ Straight and angle patterns available ■ Sizes: 1/8" & 1/4" ■ LET-LOK , male and female NPT ends ■ MAWP 300...

Open the catalog to page 2

TESTING All H-1200 Series designs have been tested and approved for Burst and Proof. All valves are factory tested with Nitrogen pressure at 300 psig (20.7 bar) for shell, stem and across-the-seat leak detection. Each valve is tested for leak tight performance. CLEANING & PACKAGING Every H-1200 series needle valve is cleaned in accordance with Standard Cleaning and Packaging (procedure 8184). Oxygen Clean & Lubricant Free Cleaning and packaging, in accordance with Special Cleaning and Packaging (procedure 8185), is available as an option. STANDARD CONFIGURATION DIMENSIONS Female NPT Male NPT...

Open the catalog to page 3