Specifications:
The HDA 70 is available in axial and radial configurations, with or without bevel gear. It features a nominal torque of 15 Nm, self-holding torque of 25 Nm, and a nominal rated speed of 27 min-1. The duty cycle is 30% with a basis time of 300 seconds, and it operates in mode S3. The supply voltage is 24 V DC ± 15%, with a nominal current of 4.8 A. Positioning accuracy is ± 1°, with a positioning range of 32,000 rotations not subject to mechanical limits. It has shock resistance of 10 g for 30 ms and vibration resistance of 10 g from 10 to 150 Hz. The insulation class is B (120 °C), with maximum axial and radial forces of 150 N and 200 N for axial shafts, and 165 N and 440 N for radial shafts, respectively. The ambient temperature is a maximum of 45 °C, and storage temperature ranges from -25 to 75 °C. The protection class is IP 65, and the weight is 2.8 kg for axial and 3.2 kg for radial configurations. Certificates include CE, UKCA, and NRTL.

Procedures and Connections:
The HDA 70 can be configured with various shaft positions and connections. Shaft positions include axial without bevel gear and radial with bevel gear in four position types. Connection options include a 6-pin connector for RS 485 without Hub, cable gland for 24 V DC with 2 x M12 female connectors for IE-bus in/out, and a male connector (7/8”) for 24 V DC with 2 x M12 female connectors for IE-bus in/out.

Bus Communication:
The device supports EtherCAT, PROFINET, EtherNet/IP, and RS 485 for bus communication. Accessories include bus cables for Industrial Ethernet with M12 connectors and power supply cables with 7/8” connector sockets, available in 10 m and 20 m lengths. A connector set for EtherCAT, PROFINET, and EtherNet/IP is also available.

Ordering Information:
The order code for the HDA 70 includes options for shaft design, bus communication, and connections. The output shaft design options include a 10 mm solid shaft with feather key and 10 mm or 12 mm hollow shafts for radial configurations with bevel gear.

Accessories:
Accessories for the HIPERDRIVE HDA70 include bevel gears, which can be ordered using the specified ordering key. The document provides a drawing with dimensions and orientation for shaft positions.