hollow shaft R15 ø 14H7 / 20 depth torque support Nominal rated speed Data interfaces CANopen, PROFIBUS DP DeviceNet, Modbus RTU, Sercos, , EtherCAT, PROFINET, EtherNet / IP POWERLINK, IO-Link , Self-holding torque PSW 30x / 32x-14 (with hollow shaft) Nominal torque Duty cycle viewing window and access to address switch and status display Shock resistance Vibration resistance Output shaft 14 mm solid shaft or 14 mm hollow shaft with adjustable collar Snap-on brake optional (holding torque = nominal torque) Maximum axial force Storage temperature Protection class IP 68 at standstill 1), IP 66 during rotation (tested with water) 1) stainless steel Ambient temperature absolute measurement of position taken directly at the output shaft screw cover plate 1) Positioning accuracy Power consumption (control unit) Positioning range in accordance with IEC / DIN EN 60068-2-27 in accordance with IEC / DIN EN 60068-2-6 viewing window and access to address switch and status display min-1 rpm Maximum radial force Data sheet PSW 30x / 32x-14 – Date: 08/ 2021 – Subject to technical changes without notice 24 V DC ± 10 % galvanically separated between control and motor and bus Nominal current Supply voltage PSW 30x / 32x-14-V (with solid shaft) 16 o ver a rotating manual adjustment shaft SW6 / 8 depth hex Dimensions in mm. For details of the connections please see also p. 55 and the instruction manual.

ORDER KEY PSE / PSS / PSW 3 SERIES  A CA: CANopen Positioning System Efficient (see p.22 - 28)  Positioning System Stainless (see p.29 - 33) Positioning System Washable (see p.34 - 38) not for PSE 31x always via an extra connector plug, not for IO-Link or PSW 5) not for PSE 34xx 3) 4) 0: CE N: NRTL + CE S: STO + CE without test pulses 7) 0: without M: with 6) Z: Plug-in, Y-coded, with jog keys 3)  5) T: TO + CE with S test pulses 7) Y: TO + NRTL S without test pulses 7) Z: TO + NRTL S with test pulses 7) 6) only 14 mm output shafts only for IP 65, not for PSE 34xx, only for EtherCAT, PROFINET,...

ACCESSORIES PSE / PSS / PSW 3 SERIES The connectors shown here can be used for all 3 types of device (PSE / PSS / PSW). This ensures that the PSE (IP 54) and PSS (IP 65) comply with the IP protection classes. We will also be pleased to help you find a suitable mating connector for the PSW (IP 68) if necessary – just ask us! Power supply + databus connector  (2x) (for option 0)  1) Power supply + databus (2x) + jog key connector (for option T, not for PSW) 1) 2) Cable and connectors for 1-connector solution 3) (for option Y or IO-Link) 1) CANopen 4) PROFIBUS DP Modbus RTU   5 m: Order no. 9601.0245...