Nominal torque Self-holding torque Nominal rated speed PSS 31x / 33x-14 (with hollow shaft) viewing window and access to address switch and status display torque support Supply voltage 24 V DC ± 10 % galvanically separated between control and motor and bus Nominal current PSS 31x / 33x-14-V (with solid shaft) Power consumption (control unit) viewing window and access to address switch and status display Positioning accuracy Positioning range Shock resistance Vibration resistance Maximum radial force Ambient temperature Storage temperature Protection class as for PSE, but with stainless steel housing optional (holding torque = nominal torque) Maximum axial force 14 mm solid shaft or 14 mm hollow shaft with adjustable collar Snap-on brake Output shaft not subject to mechanical limits in accordance with IEC / DIN EN 60068-2-6 in accordance with IEC / DIN EN 60068-2-27 absolute measurement of position taken directly at the output shaft cover, manual adjustment beneath CE, optional: NRTL, opt: STO with / without test pulses 2) welded V2A housing, ball bearings at the output shaft with sealing disc   STO: only for IP 65, only for EtherCAT, PROFINET, EtherNet / IP , without galvanic separation of the supply voltage Dimensions in mm. For details of the connections please see also p. 55 and the instruction manual. The order key and accessories can be found on p. 18 / 19. 5 Data sheet PSS 31x / 33x-14 – Date: 08/ 2021 – Subject to technical changes without notice Duty cycle hollow shaft ø 14H7 / 20 depth

ORDER KEY PSE / PSS / PSW 3 SERIES  A CA: CANopen Positioning System Efficient (see p.22 - 28)  Positioning System Stainless (see p.29 - 33) Positioning System Washable (see p.34 - 38) not for PSE 31x always via an extra connector plug, not for IO-Link or PSW 5) not for PSE 34xx 3) 4) 0: CE N: NRTL + CE S: STO + CE without test pulses 7) 0: without M: with 6) Z: Plug-in, Y-coded, with jog keys 3)  5) T: TO + CE with S test pulses 7) Y: TO + NRTL S without test pulses 7) Z: TO + NRTL S with test pulses 7) 6) only 14 mm output shafts only for IP 65, not for PSE 34xx, only for EtherCAT, PROFINET,...

ACCESSORIES PSE / PSS / PSW 3 SERIES The connectors shown here can be used for all 3 types of device (PSE / PSS / PSW). This ensures that the PSE (IP 54) and PSS (IP 65) comply with the IP protection classes. We will also be pleased to help you find a suitable mating connector for the PSW (IP 68) if necessary – just ask us! Power supply + databus connector  (2x) (for option 0)  1) Power supply + databus (2x) + jog key connector (for option T, not for PSW) 1) 2) Cable and connectors for 1-connector solution 3) (for option Y or IO-Link) 1) CANopen 4) PROFIBUS DP Modbus RTU   5 m: Order no. 9601.0245...