Nominal torque Self-holding torque Nominal rated speed PSS 30x-8 (with hollow shaft) screw DIN912 M4x16 hollow shaft ø 8H9 / 20 depth CANopen, PROFIBUS DP DeviceNet, Modbus RTU, Sercos, , EtherCAT, PROFINET, EtherNet / IP POWERLINK, IO-Link , Data interfaces Duty cycle torque support viewing window and access to address switch and status display Power consumption (control unit) Positioning range Vibration resistance Output shaft 8 mm solid shaft or 8 mm hollow shaft with adjustable collar Maximum axial force Maximum radial force as for PSE, but with stainless steel housing CE, optional: NRTL, opt: STO with / without test pulses 2) absolute measurement of position taken directly at the output shaft Storage temperature Ambient temperature Shock resistance Protection class Positioning accuracy PSS 30x-8-V (with solid shaft) in accordance with IEC / DIN EN 60068-2-27 in accordance with IEC / DIN EN 60068-2-6 Data sheet PSS 30x-8 – Date: 08/ 2021 – Subject to technical changes without notice 24 V DC ± 10 % galvanically separated between control and motor and bus Nominal current Supply voltage viewing window and access to address switch and status display Dimensions in mm. For details of the connections please see also p. 55 and the instruction manual. not subject to mechanical limits welded V2A housing, ball bearings at the output shaft with sealing disc S TO: only for IP 65, only for EtherCAT, PROFINET, EtherNet

ORDER KEY PSE / PSS / PSW 3 SERIES  A CA: CANopen Positioning System Efficient (see p.22 - 28)  Positioning System Stainless (see p.29 - 33) Positioning System Washable (see p.34 - 38) not for PSE 31x always via an extra connector plug, not for IO-Link or PSW 5) not for PSE 34xx 3) 4) 0: CE N: NRTL + CE S: STO + CE without test pulses 7) 0: without M: with 6) Z: Plug-in, Y-coded, with jog keys 3)  5) T: TO + CE with S test pulses 7) Y: TO + NRTL S without test pulses 7) Z: TO + NRTL S with test pulses 7) 6) only 14 mm output shafts only for IP 65, not for PSE 34xx, only for EtherCAT, PROFINET,...

ACCESSORIES PSE / PSS / PSW 3 SERIES The connectors shown here can be used for all 3 types of device (PSE / PSS / PSW). This ensures that the PSE (IP 54) and PSS (IP 65) comply with the IP protection classes. We will also be pleased to help you find a suitable mating connector for the PSW (IP 68) if necessary – just ask us! Power supply + databus connector  (2x) (for option 0)  1) Power supply + databus (2x) + jog key connector (for option T, not for PSW) 1) 2) Cable and connectors for 1-connector solution 3) (for option Y or IO-Link) 1) CANopen 4) PROFIBUS DP Modbus RTU   5 m: Order no. 9601.0245...