Catalogs >
halstrup-walcher GmbH >
Data sheet positioning system PSS 30x/32x-14

Data sheet positioning system PSS 30x/32x-14
3Pages

Catalog excerpts

Data sheet positioning system PSS 30x/32x-14 - 1

PSS 30x / 32x-14 (with hollow shaft) screw DIN912 M4x16 hollow shaft ø 14H7 / 20 depth 25 Nominal rated speed Self-holding torque Nominal torque torque support can be varied by rotating the cover by 180 ° CANopen, PROFIBUS DP DeviceNet, Modbus RTU, Sercos, , EtherCAT, PROFINET, EtherNet / IP POWERLINK, IO-Link , Data interfaces 20 % (basis time 600 s) at nominal torque S3 24 V DC ± 10 % galvanically separated between control and motor and bus PSS 30x: 2.4 A, PSS 32x: 3.1 A Power consumption (control unit) Positioning accuracy Positioning range Shock resistance Vibration resistance Output shaft 14 mm solid shaft or 14 mm hollow shaft with adjustable collar viewing window and access to address switch and status display Maximum radial force Ambient temperature Storage temperature Protection class as for PSE, but with stainless steel housing CE, optional: NRTL, opt: STO with / without test pulses 3) welded V2A housing, ball bearings at the output shaft with sealing disc STO: only for IP 65, only for EtherCAT, PROFINET, EtherNet / IP , without galvanic separation of the supply voltage optional (holding torque = nominal torque) not subject to mechanical limits Maximum axial force Snap-on brake in accordance with IEC / DIN EN 60068-2-6 in accordance with IEC / DIN EN 60068-2-27 absolute measurement of position taken directly at the output shaft PSS 30x / 32x-14-V (with solid shaft) over a rotating manual adjustment shaft SW 6 / 8 depth hex Dimensions in mm. For details of the connections please see also p. 55 and the instruction manual. The order key and accessories can be found on p. 18 / 19. Data sheet PSS 30x / 32x-14 – Date: 08/ 2021 – Subject to technical changes

Open the catalog to page 1

Data sheet positioning system PSS 30x/32x-14 - 2

ORDER KEY PSE / PSS / PSW 3 SERIES A CA: CANopen Positioning System Efficient (see p.22 - 28) Positioning System Stainless (see p.29 - 33) Positioning System Washable (see p.34 - 38) not for PSE 31x always via an extra connector plug, not for IO-Link or PSW 5) not for PSE 34xx 3) 4) 0: CE N: NRTL + CE S: STO + CE without test pulses 7) 0: without M: with 6) Z: Plug-in, Y-coded, with jog keys 3) 5) T: TO + CE with S test pulses 7) Y: TO + NRTL S without test pulses 7) Z: TO + NRTL S with test pulses 7) 6) only 14 mm output shafts only for IP 65, not for PSE 34xx, only for EtherCAT,...

Open the catalog to page 2

Data sheet positioning system PSS 30x/32x-14 - 3

ACCESSORIES PSE / PSS / PSW 3 SERIES The connectors shown here can be used for all 3 types of device (PSE / PSS / PSW). This ensures that the PSE (IP 54) and PSS (IP 65) comply with the IP protection classes. We will also be pleased to help you find a suitable mating connector for the PSW (IP 68) if necessary – just ask us! Power supply + databus connector (2x) (for option 0) 1) Power supply + databus (2x) + jog key connector (for option T, not for PSW) 1) 2) Cable and connectors for 1-connector solution 3) (for option Y or IO-Link) 1) CANopen 4) PROFIBUS DP Modbus RTU 5 m: Order no....

Open the catalog to page 3