PSD 426-14H-S (6 Nm, 14 mm hollow shaft with gearbox) torque support at nominal supply voltage not subject to mechanical limits 6 D Supply voltage between motor and control C Power consumption (control unit) Positioning accuracy 24 V DC ± 10 % galvanically separated Power consumption 14 Absolute 134 measurement system magnetic, without reference run, without buffer battery sealing plate 1.5 thick Characteristic curve PSD 42x / 43x Shock resistance neue Hohlwelle in accordance with IEC / DIN EN 60068-2-6 4 Datum Name Output shaft halstup-walcher GmbH D-Kirchzarten Tel.: 07661/3963-0 sinus (1 octave / min, 3 axes) 10 .. 2000 Hz 50 m / s² (approx. 5 g) 1 10 frequency cycles 1 Schutzvermerk nach DIN34 beachten! 8 mm solid shaft with flattening or 8 / 14 mm hollow shaft 4) with torque support Zylinderschraube DIN912 M4x16 30 N, 20 N with attached housing Storage temperature Protection class Ambient temperature Cylinder screw 90 N, 40 N with attached housing Plug depth Maximum radial force Vibration resistance torque support Hollow shaft Maximum axial force 3) half sinus (3 axes) A3 in accordance with IEC / DIN EN 60068-2-27 50 g 11 ms Positioniersystem pos. / neg. per axis 3 shocks A Data sheet PSD 42x / 43x – Date: 12 /  2022 – Subject to technical changes without notice CANopen, IO-Link3), PROFINET, EtherCAT, EtherNet / IP sealing plate 1.5 thick Self-holding torque (currented) Nominal torque

ORDER KEY DIRECT DRIVES PSD Order code PSD B Torque / Output shaft – C Rotation shaft / Housing M: with modulo function 4) 2-8V 2-8H 2-14H with gearbox: with changeover of parameter set 4) with target speed in process data 4) with modulo function and changeover of parameter set and target speed in process data 4) Output shaft with gearbox direct with gearbox direct 8H: 8 mm hollow shaft 14H: 14 mm hollow shaft 8H: 8 mm hollow shaft 14H: 14 mm hollow shaft 8H: 8 mm hollow shaft 14H: 14 mm hollow shaft 8H: 8 mm hollow shaft 14H: 14 mm hollow shaft 8H: 8 mm hollow shaft 14H: 14 mm hollow shaft with...