PSD 411-8H-1 (0,8 Nm, 8 mm hollow shaft without gearbox) at nominal supply voltage not subject to mechanical limits Positioning accuracy Absolute measurement system magnetic, without reference run, without buffer battery Shock resistance half sinus (3 axes) 50 g 11 ms 3 shocks pos. / neg. per axis Vibration resistance sliding sinus (1 octave / min, 3 axes) 10 .. 2000 Hz 50 m / s² (approx. 5 g) 10 frequency cycles Output shaft 5 mm solid shaft with flattening or 8 / 14 mm hollow shaft 4) with torque support Maximum axial force 15 N, 20 N with attached housing Maximum radial force in accordance with IEC / DIN EN 60068-2-6 Ambient temperature Storage temperature Protection class with E-Ident function 4) see table next to the characteristic curve sealing plate 1.5 thick torque support Hollow shaft sealing plate 1.5 thick in accordance with IEC / DIN EN 60068-2-27 Power consumption (control unit) between motor and control Nominal current torque support Plug depth Cylinder screw IP 65 installed (motor shaft IP 50) Data sheet PSD 40x / 41x – Date: 12 /  2022 – Subject to technical changes without notice 24 V DC ± 10 % galvanically separated Power consumption Supply voltage

ORDER KEY DIRECT DRIVES PSD Order code PSD B Torque / Output shaft – C Rotation shaft / Housing M: with modulo function 4) 2-8V 2-8H 2-14H with gearbox: with changeover of parameter set 4) with target speed in process data 4) with modulo function and changeover of parameter set and target speed in process data 4) Output shaft with gearbox direct with gearbox direct 8H: 8 mm hollow shaft 14H: 14 mm hollow shaft 8H: 8 mm hollow shaft 14H: 14 mm hollow shaft 8H: 8 mm hollow shaft 14H: 14 mm hollow shaft 8H: 8 mm hollow shaft 14H: 14 mm hollow shaft 8H: 8 mm hollow shaft 14H: 14 mm hollow shaft with...