HALFEN CAST-IN CHANNELS CONCRETE B 12-E

HALFEN CAST-IN CHANNELS 1 HALFEN Channels HTA-CE Application examples Materials/Corrosion protection Product range HALFEN Bolts HS/HSR Available types HTA-CS (Curved channels) Dynamic loading Application examples Product range Dynamic loading 3 HALFEN HGB Rail fixings Application examples Materials/Corrosion protection Product range 4 HALFEN HTU Channels-fixings for trapezoid metal plates Application examples Product range

HALFEN CAST-IN CHANNELS Application examples HALFEN HSF Rafter shoe HALFEN HNA Timber anchor Masonry connection - system ML/BL HALFEN Dowels Firewall - Joints SPV Restraint with turnbuckle HALFEN HKW Corner protection 6 HALFEN HCW Curtain Wall Application examples Product range HALFEN Channel HCW 52/34 for curtain wall-connections HALFEN Channel HTA-R and HZA-R with ribbed steel anchors Brackets HCW-ED and HCW-EW for front-of-slab installation Brackets HCW-B1 and HCW-B2 for top-of-slab installation Nuts, Washers Threaded rods, hexagonal bolts, couplers, ring-nuts Clamping plates Framing channels...

APPLIC ATION EXAMPLES HALFEN C AS T-IN CHANNEL S Areas of Application CURTAIN WALL POWER STATIONS Edificio Gas Natural, Barcelona Power station BRIDGES SPORTS Passerelle Simone de Beauvoir, Paris RheinEnergieStadion, Cologne LIFTS AND ELEVATORS HTU Trapezoidal sheet panels Lift fixings, guide rails UPS Air Hub, Airport Cologne/Bonn TUNNELS ROOFS AND WALLS Lötschberg-Base tunnel, Switzerland Timber pitched roof construction HTA-CE Channels 1 HZA Channels 2 HGB Channels 3 HTU Channels 4 Roof and Wall 5 Curtain Wall 6 Accessories 7 4 © 2012 HALFEN · B 12-E · www.halfen.com

HALFEN Cast-in channels HTA-CE The advantages at a glance A part from excellent adjustabilty, HALFEN Cast-in channels save considerable installation time. The result: faster construction and therefore reduced overall cost. HTA-CE Channels 1 HALFEN HTA-CE Channels Cold-rolled HZA Channels 2 3 HGB Channels Safe and reliable HALFEN HTA-CE Channels • no damage to the reinforcement • approved for fire-resistant structural elements • suitable for use in concrete pressure and tensile stress zones • high corrosion resistance steels available • suitable for dynamic loads • European technical approval...

HALFEN C A S T-IN CHANNEL S HTA -CE CURTAIN WALL CURTAIN WALL Fixings for Curtain-wall façades Fixings for Curtain-wall façades SPORTS LIFTS/ELEVATOR FIXINGS Seat fixings, St. Jakob-Park, Basel Fixing guide rails with HALFEN Channels NOISE BARRIERS BRIDGES 6 Fixings of noise barriers to concrete posts Fixings for drainage systems Curtain Wall Application Examples UTILITY TUNNELS TUNNELS Utility pipes with curved anchor channels Fixing of over-head cables in railway tunnels HTA-CE Channels 1 HZA Channels 2 HGB Channels 3 HTU Channels 4 Roof and Wall 5 Accessories 7 6 © 2012 HALFEN · B 12-E · www.halfen.com...

HALFEN C A S T-IN CHANNEL S HTA -CE General European Technical Approval ETA ▪ A comprehensive and sophisticated test program is needed to acquire an ETA. Furthermore, all further criteria required for approval must be satisfied. Planners and users can rest assured that the HALFEN HTACE Cast-in channels have all assured properties. Moreover, the properties of different products are comparable, as these are determined with a clearly defined and identical test program. ▪ As the ETA also includes detailed specifications on internal and third party quality control of ongoing production, the user can...

HALFEN C A S T-IN CHANNEL S HTA -CE General European standard CEN/TS 1992-4 HTA-CE Channels 1 HZA Channels 2 HGB Channels 3 HTU Channels 4 • The new European standard CEN/TS 1992-4 was issued in 2009 and covers the design method for “Design of fastenings for use in concrete”. • This approval represents current state of the art technology standards and may be used in all applications. ETA - 09 / 0339 432-CPD-8394-01 • To apply the new European calculation method, product specific values such as load bearing capacities or form coefficients are necessary. These and further special regulations for...

HALFEN C A S T-IN CHANNEL S HTA -CE General European standard CEN/TS 1992-4 The European Technical Approval is a confirmation of the usability of a building product as defined by the Construction Products Directive (CPD). The resistances to steel failure are listed in the European Technical Approval. The load bearing capacities are provided with dimensioning equations. Here all influences on the load bearing capacity of the anchor channel are taken into consideration. The HALFEN Cast-in channel may be used in all concrete strength classes from C12/15 to C90/105. The planned strength is incorporated...

HALFEN CAST-IN CHANNELS HTA-CE Verification method according to CEN/TS 1992-4 The design method for anchor channels included in part 3 of the standards series has been completely redesigned. Accord- ing to ETA-09/0339, verifications required for splitting failure when under load and blow-out failure are not necessary for the HTA-CE. The required verifications are shown in the fol- lowing table: NEd and VEd are tension or shear stress respectively, acting on the bolt; NaEd and VaEd are anchor load resulting from the load on the channel. CEN/TS 1992-4 also regulates additional reinforcement; further...

HALFEN C A S T-IN CHANNEL S HTA -CE General 1 HTA-CE Channels Fire-resistance From an engineering point of view, the fire-resistance requirements are similar to those set in section 3.2.7. of the standard building approval Z-21.4-34. The approval can be downloaded from our website www.halfen.de. HZA Channels 2 Fatigue All stated resistance values Δ F are specified according to general building approval Z-21.4-34 (→ see page 37). ETA value are currently under revision. 3 The RAL-Quality symbol HGB Channels The RAL seal of quality is a guarantee for coherence with the products´ technical characteristics...