ADAPTATION CLAMPING DEVICES o HAINBUCH SPANNENDE TECHNIK Size Clamping range Suitable for the following basic clamping device sizes Adaptation for changing from O.D. clamping to jaw clamping 145, 215 25 - 209 mm 65, 80, 100 Advantages ■ Jaw clamping in the HAINBUCH chuck or stationary chuck ■ Extremely fast conversion from O.D. to I.D. without detachment of the base clamping device [2 min.] ■ Self-centering on the basic clamping device ■ Enlarged clamping range of the basic clamping device ■ Deadlength clamping without pull-back effect ■ Optimal lubrication and resistant to contamination thanks to the lubricating system ■ Machining between the jaws is possible [milling or drilling] ■ Handy and lightweight compared to 3-jaw chucks ■ Run-out < 0.020 mm for remachined soft jaws Clamping elements Suitable for TOPlus mini pull-back / SPANNTOP mini pull-back TOPlus Combi pull-back / SPANNTOP nova Combi pull-back TOPlus Modular / SPANNTOP nova Modular HAINBUCH GMBH • WORKHOLDING TECHNOLOGY • Postfach 12 62 • 71667 Marbach • Erdmannhauser Strasse 57 • 71672 Marbach • Germany Tel. +49 7144.907-0 • Fax +49 7144.18826 • [email protected] • www.hainbuc