C15 series Single axis joystick

Product catalog summary

Product Overview: The document describes the C15 series single-axis joystick, designed for industrial automation and aerial working machinery. It features a spring return mechanism and a potentiometer type with high anti-interference capability and reliability. The joystick supports forward and backward direction switching and offers a variety of multi-function handles.

Mechanical Specifications: The joystick has a travel angle of ±20° and requires an operating force of 8-16N, measured 140mm from the pivot center. It boasts a mechanical life of over 5 million cycles and weighs approximately 400g.

Electrical Specifications: The supply voltage is less than 32Vdc, with a nominal resistance of 5KΩ (±20%). The electrical angle is ±20°, and the center dead zone angle is ±2.5°. Maximum power consumption is 0.25W at 20°C when non-loaded. The center voltage ranges from 48% to 52% relative to the supply voltage.

Environmental Specifications: The operating temperature range is -30°C to +70°C, while the storage temperature range is -40°C to +85°C. The joystick has a protection class of IP65 above the panel.

Output Signal Options: The joystick offers no analog output, a potentiometer type with 10% to 90% Vs ratiometer output, or a 0% to 100% Vs ratiometer output.

Handle Options: Various handle options are available, including HA, HB, HBS, HBR, K1, and K6 types, each with different features such as top switches, rocker switches, and deadman switches.

Wiring Options: The joystick can be wired using cable wiring (300mm length) or connector wiring (AMP16PIN).

Operation Mode: The joystick operates on the Y-axis with a spring return mechanism.

Micro Switch Options: Options include no micro switch, center switch, forward and backward switch, or a combination of center, forward, and backward switches.

Installation: The document provides a mounting diagram and panel cut-out dimensions, noting that the panel thickness should not exceed 4mm.

Catalog excerpts

Single axis joystick PRODUCT FEATURES · · · · Single axis, spring return Potentiometer type, high anti-interference capability, high reliability Forward and backward direction switch Variety of multi-function handle available MARKET FOCUS · Electrohydraulic control system · Industrial automation · Aerial working machinery TECHNICAL SPECIFICATIONS ① Mechanical data · · · · * Travel angle: ±20° Operating force*: 8-16N Mechanical life: >5 million cycles Product weight: Appr. 400g The measuring point is 140mm from the pivot center Supply voltage(Vs): <32Vdc Nominal resistance: 5KΩ(±20%) Electrical Angle: ±20° Center dead zone angle : ±2.5° Maximum power consumption: 0.25W（20℃, non-loaded） · Center voltage: 48%~52% （Relative supply voltage） · Operating temperature: -30℃~+70℃ · Storage temperature: -

Open the catalog to page 1

ORDERING CODES Y axis operation,spring return Potentiometer type, 0%～100%Vs ratiometer output Potentiometer type, 10%～90%Vs ratiometer output Forward and backward switch Center switch Center ,forward and backward swtich HB handle, without top switch HBS handle, with top switch HBR handle, with top rocker switch K1 handle, with top rocker switch and deadman switch K1 handle, with top rocker switch but without deadman switch K1 handle, without top rocker switch but with deadman switch K1 handle, without top rocker switch and deadman switch K6 handle, with top rocker switch and deadman switch TRS...

Open the catalog to page 2