Catalogs >
HAIDA EQUIPMENT CO., LTD >
Zero Drop Tester

Zero Drop Tester
4Pages

Catalog excerpts

HD-A520-3 Zero Drop Tester The zero drop tester is mainly used to assess the impact of the drop impact on the package during the actual transportation, loading and unloading process, and to evaluate the impact resistance of the package during the handling process and the rationality of the package design. The zero drop tester is mainly used for the drop test of larger packages. The machine uses an "E"-shaped fork that can move down quickly as a test piece bracket, and the test product is placed and balanced according to the test requirements (face, edge, corner test). During the test, the support arm moves

Open the catalog to page 1

downward at a high speed, and the test product falls to the base plate with the "E" type fork, and is embedded on the base plate under the action of the high-efficiency shock absorber. Theoretically, the zero drop tester can perform drop test from the zero height range, the drop height is set by the LCD controller, and the drop test can be performed automatically according to the set height. Control principle: It adopts the rational design of imported microcomputer to complete the design of free fall, edge, angle and surface. Common Criteria: GB/T1019-2008 Party B's products shall comply...

Open the catalog to page 2

Provincial Bureau of Quality and Technical Supervision. Customer requirements: a) For instruments with a mass less than 1KG, the drop height is 250mm b) For instruments with a mass between 1kg-10kg, the drop height is 100mm c) For instruments with a mass of more than 10kg, the drop height is 50mm d) The loading size and weight are at least 400*400*400, 10KG e) The inspected instruments are sulfur dioxide, carbon monoxide detection alarms and hydrogen sulfide gas detectors F) It is required to arrive at the site for debugging within 20 days. Because of the need for additional items, the...

Open the catalog to page 3

Guangdong QTS Group develops customized zero-drop testing machines for customers. Customers require tight time and short construction periods. Customer requirements are the driving force of QTS Group. Through the unremitting efforts of engineering research institutes and factory technicians With hard work, the design, development and production work was completed in 20 days, and sent to the customer site. At the customer site, it passed the certification, measurement, testing, and equipment that fully met the requirements and met the use requirements. The customer said a sentence after the...

Open the catalog to page 4