*mydirectindustry

Catalogs
HAIDA EQUIPMENT CO., LTD
Sofa Spring Seat Bag Cotton Tester

Sofa Spring Seat Bag Cotton Tester

Product catalog summary

Introduction: The document discusses the challenges faced by a customer in operating a Sofa Spring Seat Bag Cotton Tester due to a lack of familiarity with the instrument. Despite its simplicity, certain key operational steps were not clearly outlined in the manual, leading to difficulties in usage.

Key Operational Notes:

Stroke Test: Set the pre-pressure value within the range of 0.5 to 2.0 kg. To do this, press the SET button twice to enter the pre-pressure setting mode.
Force Value Test: Enter the force value setting by pressing the SET button, ensuring the correct force value is set for the test.
Sponge Indentation Hardness Test: Ensure the height of the pressure plate is accurately set. This height is the distance between the lower surface of the pressure plate and the test platform, which should be measured precisely.

Conclusion: By adhering to these three critical points, users can effectively operate the tester by placing the test sample, selecting the appropriate test method, and pressing the start button.

Catalog excerpts

Attention to the use of Sofa Spring Seat Bag Cotton Tester When I went to teach the customer to debug the spring fatigue life tester, I found that the customer hadn't operated it for a long time and forgot how to use the instrument. The instrument is very simple and convenient in use. Why does it still appear to be unusable? After checking the manual carefully, I found that there are several points that are not specifically noted in the manual, which causes the user to be unable to use it normally. Use note: 1. When performing the stroke test, first set the pre-pressure value, the pre-pressure value setting range is 0.5~2.0kg, press SET twice to enter the pre-pressure setting. 2. When testing the force value, set the force value and press the SET button to enter the force value setting. 3. When testing the sponge indentation hardness, the height of the pressure plate should be accurate. The height of the pressure plate refers to the distance between the lower surface of the pressure plate and the test platform (the distance between the lower surface of the pressure plate and the lower surface of the sample) As long as you pay attention to these three points, our users only need to place the test sample, select the test method, and press the start button to operate normally.

Open the catalog to page 1

All HAIDA EQUIPMENT CO., LTD catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list