Catalogs >
HAIDA EQUIPMENT CO., LTD >
Packaging testing proposal guideline-2017.1.20

Packaging testing proposal guideline-2017.1.20
45Pages

Catalog excerpts

Packaging testing proposal guideline-2017.1.20 - 1

Your Test Solution Provider

Packaging testing proposal guideline-2017.1.20 - 2

Trade Assurance Limit: US $ 287,000 Paper Packaging container test Other material packaging container Mechanical transport simulation according ISTA, ASTM and other standards

Open the catalog to page 2

Packaging testing proposal guideline-2017.1.20 - 3

Trade Assurance Limit: US $ 287,000 The only thing protecting your product from structural or environmental damage is the packaging in which it ships. Whether it ships in a cardboard box, a crate or a custom-designed case - either domestically or internationally -- you need to ensure the packaging meets requirements to avoid damage during transit. Advantages of Packaging Testing • Protect the Product • Save Money. Each Time Your Product is Damaged During Shipping, You Lose Money • Increase Brand Loyalty • Reduce the Need forTrial Shipments • Reduce Product Claim Headaches Packaging testing...

Open the catalog to page 3

Packaging testing proposal guideline-2017.1.20 - 4

Trade Assurance Limit: US $ 287,000 About Packaging Testing Test Method Test Standard Test Equipment Haida Model Compression test Compression test machine Clamp Force Testing Machine Flexural test Plastic Universal Test Machine Compression test for rigid plastic Incline impact test Drop test Chary & Izod Impact Test Machine YD/T 2061,HB 7122.3,6783.7,GJB Environment simulation test Temperature and humidity tester

Open the catalog to page 4

Packaging testing proposal guideline-2017.1.20 - 5

Trade Assurance Limit: US $ 287,000 ISTA TESTS ORGANIZED BY DISTRIBUTION MODE OR TYPE QUICK REFERENCE

Open the catalog to page 5

Packaging testing proposal guideline-2017.1.20 - 6

Trade Assurance Limit: US $ 287,000

Open the catalog to page 6

Packaging testing proposal guideline-2017.1.20 - 7

Trade Assurance Limit: US $ 287,000 Part A: Raw material test Please refer Pulp& Paper test, Paperboard test, etc..

Open the catalog to page 7

Packaging testing proposal guideline-2017.1.20 - 8

Trade Assurance Limit: US $ 287,000 Strength Test Usage & Function: This machine is used for measuring the compression strength of carton box or other packagings. It can be done constant pressure, stracking pressure and the test result can be printed out by mini-printer, the most important is that the result is an important basis for carton box design. Main parameter:

Open the catalog to page 8

Packaging testing proposal guideline-2017.1.20 - 9

Trade Assurance Limit: US $ 287,000 Usage & Function: 1. The instrument is controlled by computer or micro-computer with menu interface and the testing process is automatic; 2. Four test modes: Deformation under defined load, load under defined deformation, maximum load and stack tests; 3. Over-load protection, maximum stroke protection and error alert for safe test operation; 4. The test report can be formed automatically and printed out in an A4 form as well saved; 5. The format of the test report can be layout by you. It can be set more than one curves at same time. For example, you can...

Open the catalog to page 9

Packaging testing proposal guideline-2017.1.20 - 10

1. Deformation under defined load: Test deformation under defined load of various corrugated cartons and beehive crates 2. Load under defined deformation: Test load under defined deformation of various corrugated cartons and beehive crates 3. Maximum load: test the maximum load of various corrugated cartons and beehive crates 4. Stack test: stack test of various corrugated cartons and beehive crates Main parameter:

Open the catalog to page 10

Packaging testing proposal guideline-2017.1.20 - 11

Trade Assurance Limit: US $ 287,000 Machine’s structure / design TECSIS Compression force load cell – S-Type (Germany) Typical tension /compression force transducer with internal thread(S-Type), constructed for high accuracy up 0.02%. This series are perfect for weighting systems and the measuring of static tension and compression forces. It is available for nominal loads from 100kg up to 5000kg. Load cell is locates in the centre of upper board which can detect the force with high precision Panasonic Servo Motor Servo motors/ amps realizing rapid/ high-precision response are used in...

Open the catalog to page 11

Packaging testing proposal guideline-2017.1.20 - 12

Trade Assurance Limit: US $ 287,000 Screw Ball & double pillar Double pillar design, there has four ball screw inside the pillar Parallelism / screw The height difference of lowest & highest point less than 1mm

Open the catalog to page 12

Packaging testing proposal guideline-2017.1.20 - 13

Trade Assurance Limit: US $ 287,000 Haida’s advantages Parallelism 1) There have four screws on the top of upper plate to ensure the machine with high parallelism. 2) Easy to adjust & calibrate the parallelism Double pillar 1) There has 2 / 4 high precision ball screw (small clearance with low friction) inside the pillar to ensure the precision of displacement / speed 2) Save cost but same function with other companies 3) Save floor area The upper plate is not fixed 1) It’s easy to adjust the plate 2) It cannot detect the sensor if fix and make sure more precision force

Open the catalog to page 13

Packaging testing proposal guideline-2017.1.20 - 14

Trade Assurance Limit: US $ 287,000 Test method Basic Applications

Open the catalog to page 14

Packaging testing proposal guideline-2017.1.20 - 15

Trade Assurance Limit: US $ 287,000 Test report Microcomputer typed report: It has mini-printer to print out the result; there has max. min. mean force for reference

Open the catalog to page 15

Packaging testing proposal guideline-2017.1.20 - 16

It can be connected to PC and print out the report There has various test curve which is easy to compare & analysis the result

Open the catalog to page 16

Packaging testing proposal guideline-2017.1.20 - 17

Trade Assurance Limit: US $ 287,000 HD-A505S Computer Compression test series (4 load cells) Main technical parameter:

Open the catalog to page 17

Packaging testing proposal guideline-2017.1.20 - 18

Haida Equipment Co., Ltd1, Specimen: Carton box 2. Test date: 2016-4-183, Test method: Compression 4. Engineer: Hua No.

Open the catalog to page 18

Packaging testing proposal guideline-2017.1.20 - 19

Trade Assurance Limit: US $ 287,000 Trade Assurance Limit: US $ 287,000 Small packaging compression test Usage & Function: The machine can do a full range of testing, which includes Ring Crush Testing(RCT), Flat Crush Testing(FCT), Edge Compressive Testing(ECT), Adhesive Strength Testing(PAT) and other general compression tests(CMT), to a variety of materials like paper, packaging material, ect.. It is muti-functional testing equipment. Main technical parameter:

Open the catalog to page 19

Packaging testing proposal guideline-2017.1.20 - 20

Trade Assurance Limit: US $ 287,000 2 Clamp Force Testing Machine Panasonic Servo Motor – 2pcs HD-A534 Clamp Force Testing Machine Panasonic driver To be your lab consultant

Open the catalog to page 20

Packaging testing proposal guideline-2017.1.20 - 21

Trade Assurance Limit: US $ 287,000 Usage & Function: This machine is designed to measure the deflections of product packages and protective capacity of packages for product when suffering level pressure in the process of transportation and storage to improve the quality of product package. Design Criteria: ASTM D642\ ISTA 6- SAMS CLUB\ ISTA 3J Main parameters of machine:

Open the catalog to page 21