high and low temperature test chamber
1 /2Pages

Catalog excerpts

How to maintain and maintain the high and low temperature test chamber? First, temperature and humidity are important factors that affect device performance. They can cause corrosion of mechanical parts, reduce the finish of the metal mirror, cause errors or performance degradation of the mechanical parts of the instrument; cause the aluminum film of optical parts such as gratings, mirrors, focusing mirrors, etc. to corrode, resulting in insufficient light energy, stray light, Noise, etc., or even the instrument stops working, thus affecting the life of the equipment. It should be calibrated regularly during maintenance. There should be laboratories with four seasons constant humidity, equipped with constant temperature equipment, especially those located in the southern region. Secondly, after the equipment is used for a certain period, a certain amount of dust will accumulate inside the equipment. The maintenance engineer or under the guidance of the engineer regularly opens the equipment cover to remove the dust inside, and at the same time, re-tighten the radiators of each heating element to prevent the optical box. Clean the sealing window, calibrate the optical path if necessary, clean and lubricate the mechanical parts, restore the original state, and then carry out some necessary inspections, adjustments and records. In addition, dust and corrosive gases in the environment can also affect the flexibility of the equipment system, reduce the reliability of various limit switches, buttons, and photoelectric couplers, and are also one of the reasons for the corrosion of the aluminum film of the necessary components. It is therefore necessary to regularly clean the environment and hygienic conditions in the laboratory. Pay attention to regular maintenance during the use of the equipment to help ensure the service life of the product.

Open the catalog to page 1

When maintaining the high and low temperature test chamber, the following points should be paid attention to: 1. Implement special personnel management. The management personnel must be trained to be familiar with the performance of the high and low temperature test chamber before use. 2. Place the high and low temperature test box in a relatively benign test environment to ensure the life of the compressor and the overall experimental effect of the machine. 3. Regularly clean the dust-prone parts of the high and low temperature test chamber 4. Keep the water channel of the high and low temperature...

Open the catalog to page 2