HD-E711 Xenon Testing Chamber - 4 Pages

Add to MyDirectIndustry favorites
HD-E711 Xenon Testing Chamber

Catalog excerpts

HAIDA INTERNATIONAL Xenon Arc Test Chamber Haida International Equipment -Accelerated Environmental Test Solution <Don't guess Before you test

 Open the catalog to page 1

General Specification: Internal Dimensions: (W x D x H) 750*500*600mm (225L) Irradiance range: 500~1120W/m2 Wavelength: 290~800nm Humidity range: 55% ~ 90% RH Black panel temperature 45°C ~ 90°C Filter: daylight filter Inside chamber •    Ai r- c o o I e d ty p e • Adopts #304 stainless steel • Conical structure on top of inside chamber, increasing irradiance uniform • Life time: 1200 ~ 1600 hours • Distance between each lamp: 100mm H a n d - held irradiance meter • Calibrate irradiance automatically • Optional

 Open the catalog to page 2

Application standards: ASTM G 155; ASTM D2565; ASTM D4892-2... 4    Window Glass    0.30 W/m2-nm    340 nm    100 % light, 55 % RH, at 55° C Black Panel Temperature Note: This cycle has been used for indoor plastic.

 Open the catalog to page 3

ASTM 4892-2 Method A — Exposures using daylight filters (artificial weathering) Note: It used for materials are exposed in actual end-use environments to daylight. Method B — Exposures using window glass filters NOTE The + tolerances given for irradiance, black-standard temperature and relative humidity are the allowable fluctuations of the parameter concerned about the given value under equilibrium conditions. This does not mean that the value can vary by plus/minus the amount indicated from the given value. Note: It used for materials are exposed in actual end-use environments to daylight...

 Open the catalog to page 4

All HAIDA EQUIPMENT CO. catalogs and technical brochures


    1 Pages

  2. Catalog

    1 Pages

  3. HD-B615

    1 Pages

  4. HD-E702

    1 Pages

  5. HD-703

    1 Pages

  6. HD-E704

    1 Pages

  7. tensile tester

    13 Pages

  8. drying oven

    1 Pages

Archived catalogs