Catalogs >
HAIDA EQUIPMENT CO., LTD >
Bed Frame Comprehensive Tester Debugging

Bed Frame Comprehensive Tester Debugging
1 / 3Pages

Catalog excerpts

Bed Frame Comprehensive Tester Debugging - 1

Bed Frame Comprehensive Tester Debugging Due to the many functions of the machine, only the push-pull fatigue test function of the HI group bed frame is described here. The following are the preparations for the test

Open the catalog to page 1

Bed Frame Comprehensive Tester Debugging - 2

According to the above, fix the sample test distance Note that during the test, the unwinding speed is about 1.5 times the retracting speed. The purpose is to ensure that the retracting speed is lower than the unloading speed, so as to prevent the braided belts at both ends of the sample from being pulled, and the sample will be damaged. The following figure shows the test interface of HI group. During the test, set the limit force value on the parameter setting interface according to the dynamic friction force of the sample (HI stable force value). For example, if the dynamic friction...

Open the catalog to page 2

Bed Frame Comprehensive Tester Debugging - 3

Test process: set the test parameters "click to start" group H automatically rewinds the braided tape, and group I automatically puts the braided belt "the sample touches the left limit (H side limit)" starts to hold "hold time to" group I Automatically rewind the braided belt, and automatically put the braided belt in group H "the sample touches the right limit (I side limit)" starts the cycle "the cycle time reaches "count + 1" for the next test, until the set number of tests is reached, the equipment Automatic shutdown, in addition, during the test process, the overload value will also...

Open the catalog to page 3