air-cooled xenon lamp aging test chamber

Product catalog summary

Introduction
The air-cooled xenon lamp aging test chamber is a laboratory equipment designed to simulate harsh environments for product testing and development. It primarily uses air-cooled and water-cooled methods, with the refrigeration compressor being a critical component that requires regular maintenance.

Environmental Requirements

The ground must be flat and well-ventilated, free from flammable, explosive, dusty, and corrosive substances.
No strong electromagnetic radiation sources should be nearby.
Adequate maintenance space around the equipment is necessary.
Temperature should be between 5℃ and 30℃, with an average not exceeding 30℃ over 24 hours.
Relative humidity should be ≤85%RH, with air conditioning used in summer to maintain conditions.
Air pressure should be between 86 and 106KPa.

Compressor Maintenance

Ensure the laboratory is well-ventilated and dust-free, keeping the compressor surface clean. Store the chamber in a dust-free area if not in use for extended periods.
Maintain stable voltage levels to prevent damage to the compressor, using a voltage stabilizer if necessary.
Avoid frequent compressor starts, allowing at least 15 minutes between starts.

Optimal Operating Conditions

Ambient temperature should be between 5℃ and 28℃, with an average not exceeding 28℃ over 24 hours.
Ambient humidity should be ≤85%RH, with air conditioning used in summer.

Troubleshooting
Operators can refer to the troubleshooting chapter in the equipment manual to identify and resolve faults quickly, ensuring the test progresses smoothly.

Catalog excerpts

air-cooled xenon lamp aging test chamber-1

How to maintain the air-cooled xenon lamp aging test chamber? The air-cooled xenon lamp aging test chamber equipment is a combination test equipment that simulates one or more harsh environments in the laboratory by artificial methods. It is an environmental test equipment for researching and developing new products and inspecting product quality and performance. The cooling methods of the aging test chamber are mainly air-cooled and water-cooled. The refrigeration compressor as the core accessory of the test chamber will directly affect the performance of the front equipment, so the maintenance of the compressor cannot be ignored. So how do we maintain and maintain the compressor of the test chamber?

Open the catalog to page 1

air-cooled xenon lamp aging test chamber-3

First, we must ensure that the air-cooled xenon lamp aging test chamber has a good use environment. A good use environment must meet the following 6 requirements: 1. The ground is flat, well ventilated, and does not contain flammable, explosive, dust and corrosive gases and other restricted items in the test chamber; 2, there is no strong electromagnetic radiation source near the laboratory; 3. There is enough maintenance space around the test equipment; 4, temperature: 5 ℃ ～ 30 ℃ (average temperature within 24 hours ≤ 30℃); 5. Relative humidity: ≤85%RH (in summer, the air conditioner needs to...

Open the catalog to page 3

air-cooled xenon lamp aging test chamber-4

2. The voltage in the workplace must be stable. If the voltage is unstable, the current will be too large or too small. Long-term operation in this environment will cause great damage to the compressor. It is recommended to use a voltage stabilizer to connect the test chamber ; When the voltage of your site is unstable, it is best not to do the test. 3. Do not start the compressor frequently during use. The interval between compressor starts should be more than 15 minutes. The best environment temperature and humidity used in the test chamber is: Ambient temperature 5 ℃ --+28 ℃ (average temperature...

Open the catalog to page 4