Safety Data Sheet artmagic silicone oil Page 1 of 3 1. IDENTIFICATION artmagic - cell generating silicone oil Material: Polydimethylsiloxane Silicone Oil supplied in 20ml bottle Supplier: Hagen Automation Ltd Address: Hagen Automation, Greybern House, Templars Way, Sharnbrook, MK441PY United Kingdom Emergency Tel: 0044 7739 854 883 2. COMPOSITION Polydimethylsiloxane CAS NUMBER 63148-62-9 90 - 100 % Symptoms relating to use: Not classi ed as Hazardous 3. HAZARDS IDENTIFICATION This product is not considered to be hazardous and does not contain any hazardous components. 4. FIRST AID MEASURES Eye: Flush victim's eyes with water for 15 minutes, while holding the eyelids apart. Remove contact lenses if present and easy to do so. Continue rinsing. Get medical attention if irritation persists. Skin: None normally required. For excessive unintentional exposures, wash skin with soap and water. Inhalation: Remove to fresh air. Get medical attention if irritation or symptoms occur. Ingestion: If small quantities are swallowed, rinse out mouth with water. Do not induce vomiting unless directed to by a doctor or physician. Get medical attention for large ingestions. Non-toxic but not suitable for human consumption. 5. FIRE FIGHTING MEASURES 5.1 Suitable Extinguishing Media: Use water spray, fog or mist, alcohol foam, or dry chemicals to extinguish. 5.2 Special Hazards Arising from the Substance or Mixture: Exposure to high temperatures may release ammable hydrocarbons that can accumulate in con ned areas and present a re or explosion hazard. Burning may release hydrocarbons, and oxides of carbon. 5.3 Advice for Fire-Fighters: Fire ghters should wear full emergency equipment and approved positive pressure self-contained breathing apparatus for all res involving chemicals.

Safety Data Sheet artmagic silicone oil Page 2 of 3 6. ACCIDENTAL RELEASE MEASURES 6.1 Personal Precautions, Protective Equipment and Emergency Procedures: Remove all sources of ignition. Wear appropriate personal protective equipment as speci ed in Section 8. Keep unnecessary personnel away. Spilt product maybe slippery! 6.2 Environmental Precautions: Do not ush into surface water or sanitary sewer system. Notify local authorities if product enters sewers or public waters. 6.3 Methods and Material for Containment and Cleaning up: Stop spill at source if safe to do so. Contain spill and pump...

Safety Data Sheet artmagic silicone oil Page 3 of 3 Hazardous decomposition products Combustion will generate smoke, carbon monoxide, carbon dioxide may produce formaldehyde under decomposition by re. Hazardous reactions None under normal conditions. Hazardous properties None under normal conditions. Materials to avoid Strong oxidizing agents. Conditions to avoid Naked ames, res. 11. TOXICOLOGICAL INFORMATION Inhalation Not expected to prevent a signi cant inhalation hazard under anticipated conditions of normal use. Inhalation of mists or vapours at elevated temperatures may cause respiratory...