Catalogs >
HAEHNE >
Tension Force Measuring Roll ZAK

Tension Force Measuring Roll ZAK
2Pages

Catalog excerpts

Scope of Supply Force sensor with 5 m cable (PVC), axial output with cable connection T: cable gland, straight Variants N2: Plug connection, straight, M12, moulded S2: Plug connection, right-angled, M12, moulded Additional Options R: Radial cable output F: For use in explosive areas, incl. J-Box Additional Accessories ZAK- Mounting flange ZAK- Clamp device • Stainless steel design • Measuring range from 10 to 2000 N • Easy assembly and small space requirement • Overload protection utilizing mechanical stops • Flange mounting and clamp version available Tension force sensors of the type ZAK were specifically developed for direct measurement of forces acting in cables, wires, ropes, or tapes. They can best be installed in places where the design of the machine already requires the use of deflection rollers or guide rollers. This is e.g.the case in situations such as - cable making machines - stranding machines - foil capacitor manufacturing - label printing machinery etc. The sensor is designed according to the double beam principle. This results in high precision measurement even in off center load situations. Mechanical stops limit the measuring deflection and provide overload protection. Strain gauges applied to the active surfaces of the cantilever beam measure the acting forces. The strain gauge bridge is supplied with stabilized DC voltage from a strain gauge amplifier of the HAEHNE program for further processing of the measuring signals. Ordering example ZAK-A500-TF Type Design Nominal force Variants / Options HAEHNE Elektronische Messgerate GmbH • Heinrich-Hertz-Str.29 • D-40699 Erkrath Germany • Telefon 0211/9 2591-0 • Fax 0211/9 2591-20 http://www.haehne.de Email: info@haehne.de

Open the catalog to page 1

Technical Data Fastening possibilities ZAK- Mounting flange Material: Stainless steel ZAK- Clamping deviice Material: aluminium alloy * Attention! When assembling axes adapters, pulleys or similar devices no torque should act on the internal measuring elements. For this reason assembly should be made before installation into a machine; use wrench for countering. Technical modification reserved. HAEHNE Elektronische Messgerate GmbH ■ Heinrich-Hertz-Str.29 ■ D-40699 Erkrath Germany ■ Telefon 0211/92591-0 ■ Fax 0211/92591-20 http://www.haehne.de Email: info@haehne.de

Open the catalog to page 2

Tension Force Measuring Roll ZAK 2Pages

Catalog excerpts

All HAEHNE catalogs and technical brochures

Tension Force Measuring Roll ZAK
2Pages