Tension Compression Force Sensor ZK2 Scope of Supply Force sensor with 5 m cable (PVC), radial output with cable connection S2: Plug connection, right-angled, M12, moulded Variants N2: Plug connection, straight, M12, moulded T: Cable gland, straight Additional Option F: For use in explosive areas, incl. J-Box Pic similar Special Features • Suitable for high-strength ring screws in grade 8 • Adaption to customers requirements on demand V4 Supply voltage V1 Signal voltage Ordering Example The tension and compression force sensor ZK 2 is equipped on both sides with internal threads and is suitable for precise measurement of forces in rods. Using high-strength ring screws, the sensor can also be used between ropes. A use with threaded rods is also possible. The sensors are easy to install in existing machines or in inaccessible places. The application of measuring force must be axial and centrically. Bending and torsional forces are to be avoided because they can damage the sensor permanently and falsify the measurement result. The sensor operates on the principle of compression body, the elastic deformation of the measuring element is taken from films-based strain gauges in a full bridge circuit. This robust measuring principle ensures long-term stability, even when using the sensor under harsh conditions. An amplifier of the HAEHNE product program provide the voltage supply to the full bridge and is also processing the measurement signals. Type Size Nominal force Variants / Options HAEHNE Elektronische Messgeräte GmbH · Heinrich-Hertz-Str. 29 · D-40699 Erkrath Germany · Telefon 0211/9  25 91-0 · Fax 0211/9 25 91-20 http://www.haehne.de Email:

Technical modifications on request HAEHNE Elektronische Messgerate GmbH • Heinrich-Hertz-Str.29 • D-40699 Erkrath Germany • Telefon 0211/9 2591-0 • Fax 0211/9 2591-20 http://www.haehne.de Email: [email protected]