Catalogs >
HAEHNE >
Ring force sensor RKS01

Ring force sensor RKS01
4Pages

Catalog excerpts

Scope of Supply Force sensor with flat design, with 5 m cable (PVC) and connection T: cable gland, straight Variants N3: plug connection, straight, M8, moulded Additional Accessories F: For use in explosive areas, J-Box incl. Special Features • For dynamic and statical force measurement • Made of stainless steel • Designed for compression and tension force direction ©AD The force sensors RKS are optimally 1' suited for the precise measurement of forces acting in axial direction. In most cases the outer ring is placed onto a support or screwed to it and the force is acting on the inner ring, e. g. via a linear actuator. A typical application is the force measurement at spindle drives of coating machinery. The membrane design principle is especially well suited for the design of high precision low silhouette sensors. Its specially design makes the sensor less sensitive to a nonsymmetrical application of force. Ordering Example RKS01B5k-TF Typ Design Nominal Force Variants/ Options HAEHNE Elektronische Messgerate GmbH • Heinrich-Hertz-Str.29 • D-40699 Erkrath Germany • Telefon 0211/92591-0 • Fax 0211/92591-20 http://www.haehne.de Email: info@haehne.de

Open the catalog to page 1

HAEHNE Technical Data Special Design Mechanical customizing on request • Outer dimensions • Inner diameter • Holes • Threads HAEHNE Elektronische Messgerate GmbH ■ Heinrich-Hertz-Str.29 ■ D-40699 Erkrath Germany ■ Telefon 0211/92591-0 ■ Fax 0211/92591-20 http://www.haehne.de Email: info@haehne.de

Open the catalog to page 2

HAEHNE Ring Force Sensors RKS01 with several dimensions and drill holes Design A Nominal force 1; 3; 5; 7.5 kN Design B Nominal force 5; 10; 20 kN 21 Design C Nominal force 5; 10; 20; 25 kN Design E Nominal force 100, 200 kN Design D Nominal force 100; 200 kN ø 13,5 Technical modifications reserved HAEHNE Elektronische Messgeräte GmbH · Heinrich-Hertz-Str. 29 · D-40699 Erkrath Germany · Telefon 0211/9 25 91-0 · Fax 0211/9

Open the catalog to page 3

Safety and Handling The equipment is basically maintenance-free and can be installed in difficult to reach places. The units do not contain any spare parts or parts subject to wear. During the transportation and mounting careful handling is important, that means shocks and dropping should be avoided at all time. Otherwise equipment could be permanently damaged. Even under normal operation protection should be provided against excessive shocks and impacts. For critical applications we recommend to keep spares of sensors and electronic units in stock. The mounting and safety notes in the...

Open the catalog to page 4

Ring force sensor RKS01 4Pages

Catalog excerpts

All HAEHNE catalogs and technical brochures

Ring force sensor RKS01
4Pages