Digital Amplifier ProfiNet DA-PN Scope of Supply Amplifier in DIN Rail Mount enclosure Additional Options F: (Potentially explosive atmospheres): Use with safety barriers 1 Channel ProfiNet Strain Gauge Amplifier MWBUm Oerdering Example DA-PN-1,5 Nominal rating ProfiNet Type Please consider with the order: The amplification of the DA-PN is preset and in particular correlation with the nominal rating of the HAEHNE sensor. Special Features • 24 bit S-D-AD converter for highest precision • Very fast cycle time for time-critical applications • Simple integration of the interface in PROFINET networks • ProfiNet IRT with 2 Port Switch (2 x RJ-45), Conformance Class C • Neighborhood detection within the network (LLDP) The amplifier DA-PN is used whenever full bridge strain gauge sensors (e.g. force sensors) are to be connected with ProfiNet networks. The primary field of application is web tension and force measurement. The sensor signals are converted into digital signals with a cycle time of 0.5 ms. They are averaged and provided to the interface circuit at a distance of approx. 6 ms. From there, they are then switched in the corresponding data format. Ordering example for option F: Indicate the total resistance from measuring chain for option F (e. g. 1000 Ohm): DA-PN-1,5F1000 HAEHNE Elektronische Messgerate GmbH ■ Heinrich-Hertz-Str.29 ■ D-40699 Erkrath Germany ■ Telefon 0211/92591-0 ■ Fax 0211/92591-20 http://www.haehne.de Email: [email protected]

Technical Data V1: Signal voltage V4 : Supply voltage Technical modifications reserved HAEHNE Elektronische Messgerate GmbH • Heinrich-Hertz-Str.29 • D-40699 Erkrath Germany • Telefon 0211/92591-0 • Fax 0211/92591-20 http://www.haehne.de Email: [email protected]