Scope of Supply Force sensor with 5 m cable (PVC), with cable connection T: cable gland, straight Additional Options R: Radial cable output Ordering Exmaple: DK2M0,25-TR Type Nominal Force Variants / Options Special features • Minimum space requirement • Nominal force ratings from 250 to 3000 N • Made of stainless steel The compression force load cells of the DK2M series are characterized by their very compact design. They have been especially developed for applications where must be measured accurately within confined spaces -diameter and height. The compression force load cell of the series DK2M consist of a cylindrical membrane, whose special form was optimized with Finite Elements Analysis (FEA). Strain gauge elements on the membrane surface capture the acting forces. An amplifier of the HAEHNE product program provide the voltage supply to the full bridge and is also processing the measurement signals. The signals at the output terminals of the amplifier are proportional to the acting compression force. They can be digitally displayed or used as actual values in closed loop controls. HAEHNE Elektronische Messgerate GmbH ■ Heinrich-Hertz-Str.29 ■ D-40699 Erkrath Germany ■ Telefon 0211/92591-0 ■ Fax 0211/92591-20 http://www.haehne.de Email: [email protected]

Technical Data 1) The exact value will be displayed on the sensor. Alternatively the exact nominal rating can be delivered in conjunction with J-Box. Dimensions in mm (1 mm = 0.03937 inches) Technical modofications reserved HAEHNE Elektronische Messgerate GmbH ■ Heinrich-Hertz-Str.29 ■ D-40699 Erkrath Germany ■ Telefon 0211/92591-0 ■ Fax 0211/92591-20 http://www.haehne.de Email: [email protected]