Scope of Supply Measuring pillow block bearing with 5 m cable and with connection variant T: cable gland, straight Variant S: Plug connection, right-angled, MIL Additional Options Measuring direction H o V Special Features • Vertical and horizontal measuring direction • Nominal force 5 kN Wire assignment ®m ®/© yellow ++ white V4: Supply voltage V,: Signal voltage Specifically designed for machines where re-grinding of rolls, a surface treatment of rolls, or a quick exchange of rolls is essential. The measuring pillow block bearing MDL is designed for quick installation and removal of rolls. Only a few bolts are necessary for the exchange of rolls. The extremely narrow design is especially suited for mounting the bearings in confined spaces in machinery. The integrated measuring element function according to the double beam principle with applied full bridge strain gauges. The measuring amplifier e. g. the HAEHNE MV125 is available for the voltage supply to the full bridge and the processing of the measuring signals. Mechanical stops prevent overload conditions. Odering example MDL-V2-5k-S Type Meas. direction Fixed bearing Nominal force Variants/ Options Measuring direction H HAEHNE Elektronische Messgerate GmbH ■ Heinrich-Hertz-Str.29 ■ D-40699 Erkrath Germany ■ Telefon 0211/92591-0 ■ Fax 0211/92591-20 http://www.haehne.de Email: [email protected]

Technical Data HAEHNE Attention! Measuring rolls must have a fixed and a floating bearing and should be equipped only with self-aligning ball bearings. Temperature-dependent expansion of the shaft must be possible. Expansion does not effect the measuring accuracy. Technical modifications reserved. HAEHNE Elektronische Messgerate GmbH ■ Heinrich-Hertz-Str.29 ■ D-40699 Erkrath Germany ■ Telefon 0211/92591-0 ■ Fax 0211/92591-20 http://www.haehne.de Email: [email protected]