Pillow Block Web Tension Bearing BZL Scope of Supply Pillow block with integrated web tension measuring function with 5 m cable, with connection variant T: cable gland, straight Variant S2: Plug connection, right-angled, M12, moulded Additional Option F: For use in explosive areas, incl. J-Box V4 Supply voltage V1 Signal voltage Special Features • Pillow block with integrated web tension measuring function • Low effort for construction, modification and assembly • Measuring direction is individually selectable • Interchangeable with common types of pillow blocks • Bore holes and dimensions compatible to INA/FAG, NTN/SNR The force sensors of the BZL series are suitable for the direct measurement of web tension forces. The sensors are used like a pillow block web tension bearing. For the measurement of tension forces any angle is possible, horizontal, vertical and a 45° graduation are available as standard. Due to the exchangeability with common types of pillow blocks they are easy to install without machine design modifications. The pillow block web tension bearing BZL consist primarily of a pillow block with a measuring inner part with an integrated bearing. The inner part component contains a double beam technology system with the well-known advantages of a good linearity and a high stiffness. The strain gauges wired as full bridge deliver a signal proportional to the force. HAEHNE offers for all its sensors a corresponding range of amplifiers to condition the measuring signal and deliver the bridge voltage supply. HAEHNE Elektronische Messgerate GmbH ■ Heinrich-Hertz-Str.29 ■ D-40699 Erkrath Germany ■ Telefon 0211/92591-0 ■ Fax 0211/9 2591-20 http://www.haehne.de Email: [email protected]

HAEHNE Technical Data Design and measuring direction: Within the use of two BZL at a measuring roll the sensors are supplied in pairs, so that the sensor plugs point into the same direction. With the order please indicate the execution " L" (Left) and " R" (Right). BZL PB EN 08.16.indd For the measuring direction indicate the desired angle. As standard steps of 45° are offered. Other measuring directions on request. Technical modifications reserved HAEHNE Elektronische Messgerate GmbH ■ Heinrich-Hertz-Str. 29 ■ D-40699 Erkrath Germany ■ Telefon 0211/9 2591-0 ■ Fax 0211/92591-20 http://www.haehne.de Email:...