Measuring Roll MWF Scope of Supply Single sided measuring roll with integrated force sensor, with 5 m cable (PVC) and connection variant T: Cable connection, straight Additional Option F: For use in explosive areas incl. J-Box Additional Accessories ZAK- Mounting flange ZAK- Clamp device V4 Supply voltage V1 Signal voltage Ordering Example Special Features • Nominal forces from 50 up to 2000 N • Simple installation, supplied ready for connectiont • Cost effective compact design This single-sided measuring roll is used for tension controls of narrow webs such as labels, tapes and similar webs: The single sided bearing design has several advantages such as - good visibility of the web path - easy access to the material - simplified maintenance The narrow web measuring roll consist of the - roll shell - the force sensor ZAK - several types of mounting fixtures For roll length up to 150 mm (6.0 in.) standard clamping blocks or mounting flanges can be used. For roll length over 200 mm (8.0 in.) a special mounting flange is required. Roll diameter Nominal force Variants / Options HAEHNE Elektronische Messgerate GmbH • Heinrich-Hertz-Str.29 • D-40699 Erkrath Germany • Telefon 0211/9 2591-0 • Fax 0211/92591-20 http://www.haehne.de Email: [email protected]

HAEHNE Technical Data Values (%) based on nominal force Available Sizes Installation The mounting position of the red dot depends on the application. If the force works from the center of the sensor towards the red dot, a positive measuring value results. Design A Dimensions in mm (1 mm = 0.03937 inches) Design B Design C Technical modifications reserved. HAEHNE Elektronische Messgerate GmbH ■ Heinrich-Hertz-Str.29 ■ D-40699 Erkrath Germany ■ Telefon 0211/9 2591-0 ■ Fax 0211/92591-20 http://www.haehne.de Email: [email protected]