Catalogs >
HAEHNE >
Force Measurement Bolts KMB

Force Measurement Bolts KMB
2Pages

Catalog excerpts

Force Measurement Bolt KMB Scope of Supply Force sensor with 5 m cable (PVC), axial output with cable connection T: cable gland, straight Variant S2: Plug connection, right-angled, M12, moulded for 0 20, 35, 50 Additional Option F: For use in explosive areas, incl. J-Box - for 0 20, 35 und 50 with cable connection T Additional Accessories Spring cotter for axial lock Special Features • Simple mounting even in confined spaces • Easy retrofitted into existing machinery • Measuring range from 0,4 to 250 kN • 0 12, 16, 20, 35 and 50 mm • Fit in commercially available standard fork heads Accessories Spring cotter for axial lock The force measurement bolt KMB was specifically developed to capture tension and compression forces in machine parts equipped with standard fork heads, e. g. in conjunction with pneumatic and hydraulic cylinders. The KMB can be used in all applications where such fork heads are either already available or can be easily retrofitted. Simple and cost effective mounting of the KMB make it especially suitable for up-grading existing equipment. Strain gauges applied to the active surfaces of the double shearing beam measure the acting forces. HAEHNE offers for all its sensors a corresponding range of amplifiers to condition the measuring signal and deliver the bridge voltage supply, e.g. the MV125 unit. The signals at the output terminals of the amplifier are proportional to the acting shearing force. The signals can be digitally displayed or used as actual values in closed loop controls. Ordering Example HAEHNE Elektronische Messgerate GmbH • Heinrich-Hertz-Str.29 • D-40699 Erkrath Germany • Telefon 0211/9 2591-0 • Fax 0211/9 2591-20 http://www.haehne.de Email: info@haehne.de

Open the catalog to page 1

HAEHNE Technical Data Installation Notice Polarity of the bridge output signal Align positioning bore hole according to action line of the measuring direction. In order to obtain reverse polarity turn the KMB by 180° (positioning bore hole is at the bottom) Technical modifications reserved HAEHNE Elektronische Messgerate GmbH ■ Heinrich-Hertz-Str.29 ■ D-40699 Erkrath Germany ■ Telefon 0211/92591-0 ■ Fax 0211/92591-20 http://www.haehne.de Email: info@haehne.de

Open the catalog to page 2

Force Measurement Bolts KMB 2Pages

Catalog excerpts

All HAEHNE catalogs and technical brochures

Force Measurement Bolts KMB
2Pages