Web tension sensor XYR Scope of Supply Web tension sensor in flange design with 5 m cable (PVC) and connection variant S: plug connection, right-angled, MIL Additional Accessories Sealing ring Self-aligning ball bearing 2 Snap rings Bearing support blocks Digital Controller Modul DCM Special Features • Simultaneously measurement in X-and Y-direction • Flange design, mountable in any rotatable position • Overload protection utilising mechanical stops • Made of stainless steel The Dual Axis Web Tension Sensor XYR measures simultaneously in the X-and Y-direction. Traditional radial force sensors measure generally only in one preferred direction. Measuring effects in other directions are typically unwanted because generally they result in measuring errors. In combination with the HAEHNE Digital Controller Module DCM it is possible to solve difficult Web tension measurement applications such as the following: Changing wrap angle geometries on the entry or exit side.Typical applications winding stations. Thus, the XYR sensor makes it possible to dispose of additional idler rolls for providing a constant wrap angle and thereby resulting in a reduction of equipment size and thereby a smaller footprint for machinery and equipment. Ordering Example XYR1-15R-A500-S Type Size Shaft- ø Mes. Direction Design Nominal force Variants / Options Changing entry and exit wrap angles however, with constant enlacement angle. Web tension measurement at driven rolls HAEHNE Elektronische Messgeräte GmbH · Heinrich-Hertz-Str. 29 · D-40699 Erkrath Germany · Telefon 0211/9  25 91-0 · Fax 0211/9 25 91-20 http://www.haehne.de Em

Technical Data Bridge circuit Technical modifications reserved HAEHNE Elektronische Messgerate GmbH ■ Heinrich-Hertz-Str.29 ■ D-40699 Erkrath Germany ■ Telefon 0211/92591-0 ■ Fax 0211/92591-20 http://www.haehne.de Email: [email protected]