*mydirectindustry

Catalogs
Haefely AG
PSURGE 30.2

PSURGE 30.2

Product catalog summary

General Description
The PSURGE 30.2 is a modular surge test system designed for high energy surge tests, simulating atmospheric lightning in power circuits. It features interchangeable impulse modules for various applications, controlled by a built-in microprocessor. The system can be integrated with WinPATS software for remote control and efficient operation.

Features and Advantages

High Voltage and Current: Capable of up to 30 kV impulse voltage and 30 kA impulse current.
Modular System: Allows quick changes of impulse circuits, supporting up to four impulse shapes with one generator.
Safety and Ease of Use: Interlocked test cabinets and warning lamps ensure safe operation.
Mains Superposition: Supports surge testing on powered equipment under test (EUT) with FP-SURGE 3010.
Reliability: Designed for high impulse duty cycles with sturdy components.

Applications

Combination wave tests (IEC 61000-4-5)
Safety tests (IEC 61010)
Telecom system tests (ITU K series)
Surge tests (IEC 60060-1, ANSI C62.41)
Component tests (IEC 60664, IEC 61643-1)

Scope of Supply

PSURGE 30.2 mainframe and various impulse modules
FP-SURGE 3010 Single phase CDN
Accessories including mains cable, warning lamp, and emergency stop switch
User manual

Technical Data

Charging Voltage Range: 3 to 33 kV
Capacitors: 9 µF / 36 µF
Stored Energy: 5 kJ at max. charging voltage
Power Mains: 208, 230, or 240 V, 50/60 Hz, 1800 VA
Dimensions: 600 x 1900 x 1000 mm
Weight: 320 kg

Impulse Modules

PS30-CW: Combination wave, 3 to 30 kV, up to 6 impulses/minute
PS30-8x20: Current impulse, 3 to 15 kV, up to 2 impulses/minute
PS30-10x350: Current impulse, 3 to 15 kV, up to 2 impulses/minute
PS30-10x1000: Current impulse, 3 to 15 kV, up to 2 impulses/minute

Coupling and Decoupling Network FP-SURGE 3010

Impulse Shape: Combination wave only
EUT Line Voltage: 480 V AC, 110 V DC
EUT Current: 10 A
Coupling Modes: Line to neutral, line to neutral to ground, line and neutral to ground

Global Presence
HAEFELY AG has offices in Europe and China, providing global support and sales services.

Catalog excerpts

PSURGE 30.2 Modular 30 kV / 30 kA Surge Test System Datasheet

Open the catalog to page 1

General Description This test system is used to perform high energy surge tests. Energy surges are generated by atmospheric lightning in power circuits. A surge is characterized by high energy and relative fast front times. Pulse durations are widely variable as are the coupling paths. The PSURGE 30.2 is designed to generate a broad variety of surge impulses. Impulse modules can be exchanged quickly allowing PSURGE 30.2 to be used for different applications. Impulse module type is detected by the system software. The built-in microprocessor control unit serves as user interface and control all...

Open the catalog to page 2

FP-SURGE 3010 Single phase CDN Mains cable Warning lamp Emergency stop switch User manual Technical Data PSURGE 30.2 Mainframe Charging Voltage Range Capacitors Stored energy HV Output Power mains Test cabinet HV Switch Impulse polarity Impulse circuit External synchronization 3 … 33 kV 9 µF / 36 µF 5 kJ at max. charging voltage terminals inside the test cabinet 208, 230 or 240 V 50 / 60 Hz, 1800 VA 390 x 290 x 320 mm (15.3 x 11.4 x 12.6 in) triggered spark gap positive, negative and alternating floating, max. voltage between common and ground 500 V AC 0⁰ … 360⁰ in 1⁰ steps Environmental, Mechanical...

Open the catalog to page 3

Global Presence Europe HAEFELY AG Birsstrasse 300 4052 Basel Switzerland   China HAEFELY AG Representative Office 8-1-602, Fortune Street, No. 67 Chaoyang Road, Beijing 100025 China   This document has been drawn up with the utmost care. We cannot, however, guarantee that it is entirely complete, correct or up to date. © Copyright HAEFELY/ Subject to change without notice V2

Open the catalog to page 4

PSURGE 30.2

PSURGE 30.2

Catalog excerpts

All Haefely AG catalogs and technical brochures