Catalogs >
Habasit >
HabaSYNC® WH-A-02

HabaSYNC® WH-A-02
2Pages

Catalog excerpts

HabaSYNC® WH-A-02 Main industry segments Hygiene, Food, Material Handling, Packaging Belt applications Hygiene Industry like Diaper, Tissue, Personal Health Care, Feminine Care, Washcloths, Wipes and Tissues, Cheese manufacturing, Food end of Lines Description Trapezoid teeth with a 40° tooth angle are spaced on 0.500 inch (12.7 mm) centers. Food grade transparent thermoplastic polyurethane with 88 Shore A provides good resistance to oils and solvents and withstands UV radiation well. TPU also protects the Aramid tensile member and allows smooth handling of any kind of goods - including direct contact with foodstuff. 160 Aramid Cords at 600 mm belt width equally distributed in the belt provide high strength. Sketch of basic shape according to DIN ISO 5296 Belt data Belt width, nominal mm 600 Admissible tensile force, Admissible tensile force, open belt joined belt N N lbf lbf 9970 4985 2241 1121 Tensile force for 1% elongation N lbf 20790 4673 Mass of belt (belt weight) kg/m lb/ft 2.14 1.65 Belt width: any cutting width is possible within the nominal belt width. Temperature range of matrix material: -20 to 80 °C (-4 to 176 °F) The tensile force for 1% elongation (k1% static) per unit of width determines the stress-strain behavior of the belt. It defines the resulting strain if a certain stress is applied and vice versa. This value corresponds to the belt without joint. The admissible tensile force of a running belt is defined by the strength of the joint or by the strength of the belt without joint. Habasit defines an admissible belt force (without joint) for all belts, which always corresponds to a belt elongation of 0.6%. Joined belts are calculated with half admissible force. Please contact Habasit for detailed information and calculations. All data are approximate values under standard climatic conditions: 23 °C / 73 °F, 50% relative humidity (DIN 50005 / ISO 554), and are based on the Master Joining Method. Product Data Sheet (Releas

Open the catalog to page 1

HabaSYNC® WH-A-02 Belt options Description Tooth side: Polyamide 6 fabric, green Conveying side: unprocessed matrix material Tooth side: Polyamide 6 fabric, green Conveying side: Polyamide 6 fabric, green For detailed material properties (e.g. coefficient of friction, colors, etc.) please contact your Habasit representative. A = with counter flection B = without counter flection Disclaimer Product Application Disclaimer (valid for ALL Habasit products and mentioned on all PDS) This disclaimer is made by and on behalf of Habasit and its affiliated companies, directors, employees, agents...

Open the catalog to page 2