*mydirectindustry

ENI-5EE

Product catalog summary

Main Industry Segments: The product is applicable in electronics, paper manufacturing and processing, paper printing and finishing, and plastics industries.

Applications: It is used as an accumulation belt, infeed belt, inspection/control belt, processing belt, and transfer belt.

Special Features: The belt is abrasion-resistant on both sides, antistatic, and cut-resistant.

Product Construction/Design: The conveying side is made of polyurethane cross-linked (PUR) with an impregnated fabric surface, non-adhesive, and black in color. The traction layer is polyester (PET) with two fabrics. The pulley side shares similar properties with the conveying side.

Product Characteristics: The belt is antistatically equipped (EN 12882), has an adhesive-free joining method, and lacks specific flammability prevention properties. It is not suitable for food applications according to FDA, USDA, or EU standards.

Technical Data: The belt has a thickness of 1.20 mm and a mass of 1.2 kg/m². It can operate continuously between -30 °C and 80 °C. The coefficient of friction varies depending on the surface it interacts with. The seamless manufacturing width is 2400 mm, with an option for 4000 mm.

Joining Related Properties: The belt can be joined using Flexproof or Thermofix methods, with specific requirements for pulley diameter and tensile force.

Suitability: The belt is suitable for slider beds and carrying rollers but not for troughed or curved installations. It is not suitable for low noise or metal detector applications.

Chemical Resistance: Information is available through a provided link.

Recommendations: Install the belt with slack and tension it for optimal performance. Protect from sunlight, UV radiation, dust, and dirt. Store in a cool, dry place.

Disclaimer: The product is provided "as is" without warranties beyond those explicitly stated by Habasit. Users must assess suitability for specific applications.

Catalog excerpts

Light Conveyor Belts ENI-5EE Main industry segments Electronics, Paper manufacturing and processing, Paper printing and finishing, Plastics Applications Accumulation belt, Infeed belt, Inspection/control belt, Processing belt, Transfer belt Special features Abrasion resistant on both sides, Antistatic, Cut resistant, High abrasion resistance Product Construction / Design Product characteristics Product Data Sheet (Released) 06.09.2018

Open the catalog to page 1

Light Conveyor Belts ENI-5EE Technical data All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554). Product Data Sheet (Released) 06.09.2018

Open the catalog to page 2

Light Conveyor Belts ENI-5EE Chemical resistance Link to 'Chemical resistance information': http://www.habasit.com/en/chemical-resistance.htm Mode of use or conveyance Accumulation, Horizontal Calculations For most applications calculation is not required. Should you still need a calculation: please ask Habasit. Recommendation Install the slack belt and tension until running perfectly under the full belt load, Recommended initial elongation 0.3 - 0.5% For details consult 'Storage and handling requirements for belts and machine tapes' or contact Habasit, Protect belts from sunlight/UV-radiation/dust...

Open the catalog to page 3

ENI-5EE

ENI-5EE

Catalog excerpts

All Habasit catalogs and technical brochures

Archived catalogs