*mydirectindustry

ENI-12P

Product catalog summary

Main Industry Segments: The product is applicable in electronics, paper manufacturing and processing, paper printing and finishing, and plastics industries.

Applications: It is used as an accumulation belt, infeed belt, inspection/control belt, processing belt, and transfer belt.

Special Features: The belt is abrasion-resistant on both sides, antistatic, and cut-resistant.

Product Construction/Design: The conveying side is made of polyurethane cross-linked (PUR) with an impregnated fabric surface, non-adhesive, and black in color. The traction layer is made of polyamide (PA) with two fabrics. The pulley side shares similar properties with the conveying side.

Product Characteristics: The belt is antistatically equipped, does not have an adhesive-free joining method, lacks specific flammability prevention properties, and is not suitable for food applications according to FDA, USDA, or EU standards.

Technical Data: The belt has a thickness of 1.6 mm and a mass of 1.7 kg/m². It can operate continuously between -20 °C and 100 °C. The coefficient of friction varies depending on the surface it interacts with. The seamless manufacturing width is 1200 mm.

Joining Related Properties: The belt uses the Thermofix Master joining method. The minimum pulley diameter is 60 mm, and it is suitable for slider beds and carrying rollers but not for troughed installations or low noise applications.

Chemical Resistance: Information is available through a provided link.

Mode of Use or Conveyance: Suitable for accumulation and horizontal conveyance.

Recommendations: Initial elongation should not go below 0.5%. Belts should be protected from sunlight, UV radiation, dust, and dirt, and stored in a cool, dry place.

Disclaimer: The product is provided "as is" without warranties beyond those explicitly stated by Habasit. Users are responsible for determining suitability for specific applications.

Catalog excerpts

Light Conveyor Belts ENI-12P Main industry segments Electronics, Paper manufacturing and processing, Paper printing and finishing, Plastics Applications Accumulation belt, Infeed belt, Inspection/control belt, Processing belt, Transfer belt Special features Abrasion resistant on both sides, Antistatic, Cut resistant, High abrasion resistance Product Construction / Design Product characteristics Product Data Sheet (Released) 09.12.2019

Open the catalog to page 1

Light Conveyor Belts ENI-12P Technical data Joining method Thermofix Master joining method for standard applications All data are approximate values under standard climatic conditions: 23°C/73°F 50% relative humidity (DIN 50005/ISO 554). Product Data Sheet (Released) 09.12.2019

Open the catalog to page 2

Light Conveyor Belts ENI-12P Chemical resistance Link to 'Chemical resistance information': http://www.habasit.com/en/chemical-resistance.htm Mode of use or conveyance Accumulation, Horizontal Calculations For most applications calculation is not required. Should you still need a calculation: please ask Habasit. Recommendation Do not go below initial elongation (epsilon) ~ 0.5%, Install the slack belt and tension until running perfectly under the full belt load For details consult 'Storage and handling requirements for belts and machine tapes' or contact Habasit, Protect belts from sunlight/UV-radiation/dust...

Open the catalog to page 3

ENI-12P

ENI-12P

Catalog excerpts

All Habasit catalogs and technical brochures

Archived catalogs