- Catalogs
- H2SYS GmbH
- AIRCELL®
AIRCELL®
AIRCELL®
H2SYS specializes in manufacturing hydrogen fuel cell systems tailored for industrial applications and system integrators. The systems are designed for ease of use with a 'plug and play' setup, eliminating the need for specific pressure reducers or control boards for cooling and humidification. Users can control the system's power output based on the load.
The AIRCELL® product line is engineered for reliability and optimal electric efficiency, offering three models with power outputs ranging from 500W to 3000W. These systems are customizable to meet specific application requirements.
- Nominal Power: 500W, 1000W, 3000W
- Maximal Power: 680W, 1250W, 3600W
- Output Voltage: 12-18V, 18-28V, 52-80V
- Current Range: 5-50A, with a maximum of 65A for 30 seconds
- Dimensions (L x W x H): 212 x 423 x 347 mm to 212 x 423 x 686 mm
- Mass: 10 kg to 24 kg
- Number of Cells: 18, 28, 80
- Hydrogen Specification: Minimum quality grade 3.5 (99.95%)
- Hydrogen Inlet Pressure: 5-9 bar
- Fuel Consumption: 65 g/kWh
- Nominal Fuel Consumption: 6 Nl/min, 10 Nl/min, 30 Nl/min
- System Power Supply: 24 Vdc (200W at start-up)
- Start Procedure: Less than 5 seconds via start/stop button or CANbus message
- Operating Temperature: +5°C to +45°C
- Protocol: CANbus 2.0 A
- Data Collection: Voltage, current, temperature, system status, error reports
- Optional Features: ModBus communication, computer software, cells voltage monitoring, DC/DC converter, operation from -5°C to +5°C
- Designed under CE directives
- Stack: IEC 62282-2:2012
- Low Voltage: 2014/35/UE
- CEM: 2014/30/UE
H2SYS, 19 rue Becquerel, 90000 Belfort, France
Phone: +33 (0)3 84 58 36 14
Email: [email protected]
Website: www.h2sys.fr
Catalog excerpts
TECHNICAL PRODUCT DATASHEET AIRCELL® Hydrogen Air Cooled Fuel Cell Systems H2SYS manufactures hydrogen fuel cell systems adapted to industrial and system integrators. The Balance of Plant has been fully designed to offer a «plug and play» system : no need of specific pressure reducer or control board for cooling and humidification. User only controls the power of the fuel cell system by the load in output. AIRCELL® product range has been designed for reliability and optimum electric efficiency. AIRCELL® range is composed of 3 products covering powers from 500W to 3000W. Several options are available for customization and for matching specificities of the targeted application. Ready-to-use Self-powered Communication (CanBus) Modular (up to 5 systems in parallel) H2 and electric safety High efficiency (up to 67%) Polarization curves Aircell polarization curves Aircell power curv
Open the catalog to page 1
Optionals features Computer software Modbus communication Technicals datas PERFORMANCES 500 ACS HYDROGEN Hydrogen specification Minimun quality grade 3,5 (99,95%) Hydrogen inlet pressure Fuel consumption Nominal fuel consumption OPERATION System power supply Starting procedure Start Communication protocol Operating ambient temperature Collectable datas Optional features CERTIFICATION Designed under CE directives INFORMATIONS AND REQUEST FOR QUOTATION 24 Vdc (@start-up 200W) Start and stop button CANbus message (optional : user interface or Modbus message) Less than 5 s CANbus 2.0 A + 5°C to +...
Open the catalog to page 2All H2SYS GmbH catalogs and technical brochures
BOXHY®2 Pages