Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. H&T ProduktionsTechnologie GmbH
  3. mechanical presses - transfer presses

mechanical presses - transfer presses

mechanical presses - transfer presses
1 / 1 PageView full catalog

mechanical presses - transfer presses

Product catalog summary
Specifications:
  • Press Force: The machines in the PTr series have varying press forces: PTr-32 at 320 kN, PTr-45 at 450 kN, and PTr-65 at 650 kN.
  • First Station Press Force: The first station press force is 30 kN for PTr-32, 40 kN for PTr-45, and 100 kN for PTr-65.
  • Movable First Station: The first station is movable in PTr-45 and PTr-65 models, but not in PTr-32.
  • Ram Stroke: The ram stroke ranges from 60 to 140 mm for PTr-32 and PTr-45, and from 100 to 160 mm for PTr-65.
  • Number of Strokes: PTr-32 and PTr-45 operate at 50 to 250 strokes per minute, while PTr-65 operates at 20 to 150 strokes per minute.
  • Table Dimensions: The table dimensions are 1720 x 400 mm for PTr-32 and PTr-45, and 1900 x 400 mm for PTr-65.
  • Transfer Steps: Transfer steps vary with each model, with PTr-32 and PTr-45 having steps of 45, 58, 63.5, and 76.2 mm, and PTr-65 having steps of 65, 76.2, and 101.6 mm.
  • Number of Stations: PTr-32 and PTr-45 have 12 to 26 stations, while PTr-65 has 11 to 17 stations.
  • Tool Installation Height: The tool installation height is 318 mm for PTr-32 and PTr-45, and 450 mm for PTr-65.
  • Sheet Width: The sheet width is 300 mm for PTr-32 and PTr-45, and 390 mm for PTr-65, with possible modifications.
Procedures and Recommendations:
  • The machines can be equipped with one or two strip feeds.
  • The drive construction allows the first stage to be a combined drawing and cutting operation, with adjustable positioning along the transport direction.
  • The ram and transfer stroke can be customized to meet specific requirements.
See more

Catalog excerpts

mechanical presses - transfer presses-1

Press Series PTr Idea: This group comprises machines that are to be equipped with one or two strip feeds. The drive construction generally permits the first respective stage to be performed as a combined drawing and cutting operation, whose position can be changed along the parts transport direction. The ram and transfer stroke can be adapted to suit your requirements. (modifications possible)

 Open the catalog to page 1

All H&T ProduktionsTechnologie GmbH catalogs and technical brochures

  1. mechanical presses - overview
    mechanical presses - overview

    1  Page

  2. mechanical presses - redraw stage
    mechanical presses - redraw stage

    1  Page

  3. mechanical presses - cupping stage
    mechanical presses - cupping stage

    1  Page

  4. Corrugated pipe forming machines
    Corrugated pipe forming machines

    5  Pages

  5. Multi-servo spindle presses
    Multi-servo spindle presses

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.