WVVEP
2Pages

Catalog excerpts

Hydraulic spray nozzle High cooling effect due to large spray area and high spray impact. Application for Iron & Steel mill ・Roll cooling ・Plate, Hot strip sheet cooling ・Casted steel cooling Other application ・Cleaning wide area ・Uniform cleaning ・Water saving Spray distribution The thickness of WVVEP is about 3~4times of standard flat spray nozzle. Standard flat spray Width direction SPRAY DISTRIBUTION RATIO (%) Thick flat spray with even distribution Nozzle：1/4MWVVEP90120S303 Spray height：200mm Spray pressure：0.3MPa (SPRAY DISTRIBUTION RATIO) Spray pattern Spray thickness-width ratio is 1:(3-4). 100 0 100 200 ノズル直下からの距離(mm) (DISTANCE FROM CENTER) DITANCE FROM SPRAY CENTERLINE (mm) WVVEP series Standard flat spray (SPRAY DISTRIBUTION RATIO) ■Thickness comparison 流量比率(%) SPRAY DISTRIBUTION RATIO (%) Thickness direction (at right under nozzle) 200 150 100 50 0 300 WVVEP Standard flat Spray

Open the catalog to page 1

Specification WVVEP series ・High spray impact and large spray area achieve high cooling effect. Pipe Conn. Size ネジサイズ・Minimal clogging due to large free passage diameter and simple structure. Pipe Conn. Size Spray Spray Angle Capacity Code Code （①Nozzle body ②Deflector） ■ Material S303：Stainless Steel 303 B：Brass (C3604) Spray Angle（°） Width Pipe Conn. Size 1/4M Spray Capacity（L/min） Mean Free Droplet Pass. Dia. Dia. （μm）（mm） Pipe Conn. Size Spray Angle Code Spray Capacity Code Please inquire or order for a specific nozzle using this coding system. For details or any inquiry please feel...

Open the catalog to page 2