Catalogs >
H. IKEUCHI & CO., LTD. >
Catalog on Hydraulic Spray Nozzles

Catalog on Hydraulic Spray Nozzles
124Pages

Catalog excerpts

r^^^ipU 'Trjs gaiMMliiK our Jives. Crops essential to eyJ life grow by absorbing moisture from the air, as well as their roots, ndergrowth and fallen leaves into organic fertilizer. Addition techniques were developed in area^ffiflr rivers, because the river’s produced the proper humidity needed. We wanted to create this fog, which had played such an important role in our existence and had been key to the development of society. This desire was the origin for IKEUCHI's idea to "sell fog" as an industrial material. With nozzles as our instruments IKEUCHI, "The Fog Engineers", has utilized the...

Open the catalog to page 2

There are many opinions on the classification of spray droplet sizes but IKEUCHI, "The Fog Engineers", have classified them as below. size (spray droplet diameter) measured by the immersion sampling method. Measured results differ depending on measuring method. Assuming the mean droplet diameter measured by the immersion sampling method as 1, the correlation of Sauter mean droplet diameters among three measuring method is shown on the right.

Open the catalog to page 4

Coarse atomization

Open the catalog to page 5

■This catalog offers IKEUCHI's hydraulic spray nozzles, which are divided into the following sections: flat spray nozzles, hollow cone and full cone spray nozzles, solid stream jet nozzles, and special spray nozzles. ■ Please refer to the Catalog on Pneumatic Spray Nozzles for pneumatic spray nozzles. Technical Information PP-3- Products Lineup Flat Spray Nozzles Standard Flat Spray Three-piece structure standard flat spray I— Quick detach stainless steel nozzles \— One-piece structure standard flat spray — Coin-shaped design Even Flat Spray Even flat spray Quick detach stainless steel...

Open the catalog to page 6

All IKEUCHI’s precision-made hydraulic spray nozzles are guaranteed for spray capacities and spray angles. This guarantee covers metal, plastic, and ceramic nozzles. Spray Capacity Tolerance Spray Angle Tolerance Spray Angle Tolerance for Solid Stream Nozzles Spray nozzles shown in this catalog are guaranteed to within +1-5% of the rated spray capacity under the standard pressure. Flat spray and cone spray nozzles shown in this catalog are guaranteed to within +/-50 of the rated spray angle under the standard pressure. Spray angle is the angle of spray measured near the nozzle unless...

Open the catalog to page 8

A standard pressure is defined as the design pressure based on the common liquid pressure during normal use for each hydraulic nozzle series. Our nozzles are designed to provide the specified spray capacity, spray angle, optimal spray pattern (cross sectional shape of the spray), and spray distribution at each standard pressure. The standard pressures are indicated in each table. In addition, IKEUCHI sets an original inspection standard for spray pattern and only the nozzles that pass the inspection will be shipped. The figures in this catalog are based on tap water at room temperature and...

Open the catalog to page 9

The standard and optional materials available for our nozzles are shown in the material table of each nozzle series, using the material codes listed below. As "The Fog Engineers", we, IKEUCHI, have been developing nozzles in a variety of materials to meet the desires and applications of our customers. We were the first to develop ceramic orifice-inserted spray nozzles and succeed in marketing them throughout the world. Listed below are the materials of nozzles and parts, and resistance characteristics of each material against common chemicals. For more information on resistance...

Open the catalog to page 10

■ Spray nozzle specifications are shown in the respective tables. One-piece StructureStandard Flat Spray Nozzles [Features] • Flat spray pattern with a mountainshaped spray distribution having gradually tapered edges. • Tapered edges overlap to provide uniformity of spray distribution in multiple-nozzle arrangements. [Standard pressure] 0.3 MPa ives, containers, films, felts, filters, screens, crushed stones, earth and sand, metal parts, steel plates and pieces ;, oils, lubricants, liquids, solutions, les, herbicides kes, heat exchangers, tanks, steels, roofs protection, heat protection,...

Open the catalog to page 11

Three-piece StructureStandard Flat Spray Nozzles Flat Spray [Features] • Flat spray pattern with a mountain-shaped spray distribution having gradually tapered edges. • Tapered edges overlap to provide uniformity of spray distribution in multiple-nozzle arrangements. [Standard pressure] 0.3 MPa [Applications] Cleaning: Automotives, containers, films, felts, filters, screens, bottles, crushed stones, earth and sand, metal parts, machines, steel plates and pieces Spraying: Etchants, oils, lubricants, glues, solutions, insecticides, herbicides Cooling: Gas, smokes, heat exchangers, tanks,...

Open the catalog to page 13

Three-piece Structure Standard Flat Spray Nozzles Spray angle code 0: Available wlth/wlthout strainer O: Availab

Open the catalog to page 14

Three-piece Structure Standard Flat Spray Nozzles #: Available with/without strainer O: Available without strainer Flat Spray Please inquire or order for a specific nozzle using this coding system. ©Complete assemblies (Example) 1/4M VV 11505 S303W (Example) 1/4 VV 11505 S303 Spray angle code 115 S 15 Spray capacity code 02 i 200 W (with strainer) (Blank denotes "without strainer") Spray angle code ■ 115 S 15 Spray capacity code TPVDF is only for V series (PVDF nozzle tip

Open the catalog to page 15

Flat Spray Quick-detachable Standard Flat Spray Nozzles Stainless Steel [Features] • Flat spray pattern with a mountain-shaped spray distribution having gradually tapered edges. • Easy mounting/dismounting with a knurled tab. • Quick-detachable design helps to significantly reduce maintenance time. [Standard pressure] 0.3 MPa [Applications] Cleaning: Automotives, containers, films, felts, filters, screens, bottles, crushed stones, earth and sand, metal parts, machines, steel plates and pieces Spraying: Oils, lubricants, glues, insecticides, herbicides Cooling: Tanks, roofs Water screen:...

Open the catalog to page 16

Flat Spray Please inquire or order for a specific nozzle using this coding system. ©Nozzle tip only (Example) 1/4 VV 11560 S303 ©Complete assemblies (Example) 1/4M INVV 11560 S303 (FEPM) + S316L-IN Note: Nozzle tips of INVV-SS series are the same as those used on VV series. Nozzle tips of INV series are the same as those used on V series.

Open the catalog to page 17