Process Controller T1611100

Product catalog summary

Overview: The T1611100 Process Controller by H&B Sensors Ltd is designed to accept temperature sensor input signals from either an RTD or thermocouple, providing precise output control to maintain a process at a set value. It features dual 4-digit displays for simultaneous viewing of process value and set-point, with front panel indicators for control and output status.

Specifications:

Display: Two-line, 4-digit LCD with backlighting; top display with red backlighting, bottom with green.
Input Signals: Supports various thermocouple types (T, E, J, K, R, S, B, N, C) and linear resistance inputs (Pt100, 0 to 320 Ω).
Power: 85 to 250 VAC, 50/60Hz, 8 VA.
Control and Alarm Outputs: Includes relay outputs with a contact rating of 3 A @ 250 VAC or 30 VDC, and logic/SSR output for main control.
Control Modes: PID or On/Off, with programmable cycle time and auto-tune features.
Alarms: Two relay alarm outputs with various modes including high/low acting and deviation alarms.
Memory: Nonvolatile E2PROM retains all programmable parameters.
Safety and Compliance: UL Recognized Component, meets IEC 61010-1 and IP65 standards for enclosure rating.

Environmental Conditions:

Operating Temperature: 0 to 50°C.
Storage Temperature: -40 to 80°C.
Humidity: Up to 85% max relative humidity (non-condensing).
Vibration and Shock: Compliant with IEC standards for operational vibration and shock.
Altitude: Up to 2000 meters.

Construction and Installation: The controller is housed in a black plastic alloy case with a panel latch for vertical or horizontal stacking, meeting NEMA 4X/IP65 requirements for indoor use. It features wire-clamping screw terminals for connections.

Catalog excerpts

Process Controller T1611100 RTD and Thermocouple Temperature Input INPUT SIGNALS: The T1611100 Process Controller accepts temperature sensor input signals from either an RTD or thermocouple and provides accurate output control to maintain a process at a set value. Thermocouple Input: Type Dual 4-digit displays allow viewing of the process value and set-point simultaneously. Front panel indicators show the control and output status. The PID programming or On/Off control allows these controllers to meet a wide variety of application requirements. Linear Resistance Input: Type Linear Resistance H&B Sensors Ltd | Odyssey House | Durban Road | Bognor Regis | West Sussex | PO22 9RH | United Kingdom Tel: +44(0)1243 866866 | Email: [email protected] | www.hbsensors.com

Open the catalog to page 1

Process Controller T1611100 RTD and Thermocouple Temperature Input Specification Display 2 Line by 4-digit, LCD negative image transmissive with backlighting Top (Process) Display 7.6 mm high digits with red backlighting Bottom (Parameter) Display 5.1 mm high digits with green backlighting Annunciators Status Annunciators: O1 Main control output is active O2 Cooling output is active (when Alarm 2 is used for cooling) A1 Alarm 1 output is active A2 Alarm 2 output is active °F, °C Temperature units %PW Output power percentage is shown in Bottom display MAN Controller is in Manual Mode. R Ramping...

Open the catalog to page 2

RTD and Thermocouple Temperature Input Environmental Conditions Operating Temperature Range 0 to 50°C Storage Temperature Range -40 to 80°C Operating and Storage Humidity 85% max relative humidity (noncondensing) from 0°C to 50°C Vibration According to IEC 68-2-6 Operational 5 to 150 Hz, in X, Y, Z direction for 1.5 hours, 2 g's Shock According to IEC 68-2-27 Operational 20 g's (10 g relay), 11 msec in 3 directions Connection Wire-clamping screw terminals Construction Black plastic alloy case and collar style panel latch. Panel latch can be installed for vertical or horizontal instrument stacking...

Open the catalog to page 3

Process Controller T1611100

Process Controller T1611100

Catalog excerpts

All H&b Sensors catalogs and technical brochures